Zhermack

Zhermack Elite Hd+ Soft Putty And Light Body

Rs. 6,990.00

~~Rs. 11,255.00~~ Rs. 6,990.00

Sale Sold out

Types Zhermack Elite Hd+ Soft Putty Normal Set 4 x 450ML Zhermack Elite Hd+ Putty Soft Normal Set 2 x 250ML Zhermack Elite Hd+ Light Body Normal Set (Cartridge) (C203030) Zhermack Elite Hd+ Putty Soft Normal Set (4 x 450ML) + Light Body (4x 50ML) Zhermack Elite Hd+ Light Body Normal Set (Tubes) (C203035)

Quantity

Elite HD+ is an impression material that combines the effects of nanotechnology with hydrocompatibility, thus guaranteeing high performance in a variety of clinical conditions. The Elite HD+ range allows practitioners to choose between normal and fast set materials to suit their clinical needs or personal preferences. Very high viscosity A-Silicone impression material for fixed prostheses.

Zhermack Elite HD+ Putty Soft Normal Set

Zhermack Elite HD+ Putty Soft Normal Set is a very high viscosity A-Silicone precision impression system. Ideal for fixed prostheses. Suggested technique: two-stage with standard trays.

Characteristics:

Hydrocompatibility of the fluids
Thixotropy
Tear resistance
At least 99% elastic recovery
Dimensional stability for up to 15 days
Biocompatible even on damaged mucosae
Colour contrast

Advantages:

Application versatility: the range features 6 different consistencies and 4 different pack types (tubs, tubes, and 1:1 and 5:1 cartridges)
Impression accuracy and precision: the hydrocompatibility of the washes helps practitioners obtain high-quality impressions
Impression accuracy and reliability, due to its tear resistance and elastic recovery
Dimensional stability even after disinfection
Visual comfort: the colour contrast of the materials with different viscosities facilitates impression interpretation
Safety for both patient and practitioner: products can be disinfected using disinfectants containing quaternary aluminium salts, mixtures of alcohol and surface tension reducers, whilst maintaining their characteristics of accuracy and dimensional stability even after disinfection.

Features

Hydrocompatibility - Hydrocompatible materials flow readily over the surface of the teeth and along preparation margins, making it possible to capture the details required for an accurate impression.
Thixotropy - They flow over the surfaces they are positioned on and do not run once they have been positioned in the patient’s mouth.
High tear resistance
At least 99% elastic recovery
Ideal working time/setting time ratio

Description

Specification

Zhermack Elite Hd+ Soft Putty Normal Set:

Delivery system: Manual mixing or 5:1 automatic mixing
Recommended technique: Double step impression
Type of setting: Normal Set
Working time, including mixing time*(min:s): 2:00
Time in mouth*(min:s): 3.30
Setting time*(min:s): 5.30
Elastic recovery: > 99 %
Linear dimensional change (after 24 h): < 0,20 %
Hardness (Shore A): 60 ± 2
Shelf-Life: 3 years

Temperature:

These times are intended from the start of mixing at 23°C/73°F. Higher temperatures reduce these times, lower temperatures extend them.
The time in the mouth is intended as at 35°C / 95°F.

Packaging

Zhermack Elite Hd+ Soft Putty Normal Set 4 x 450ml

4 x 450ml Putty Jar
2 x measuring spoons

Zhermack Elite Hd+ Putty Soft Normal Set 2 x 250ML

1 x 250 ml Base tub
1 x 250 ml Catalyst tub
2 x Measuring spoons

Zhermack Elite Hd+ Light Body Normal Set (Cartridge) (C203030)

2 x 50 ml Cartridges (Base+Catalyst)
12 Mixing Tips (Small)

Zhermack Elite Hd+ Putty Soft Normal Set (4 x 450ML) + Light Body (4x 50ML)

4 x 450ml Putty Jar
2 x Elite HD+ Light Body Cartridge

Zhermack Elite Hd+ Light Body Normal Set (Tubes) (C203035)

1 X 90ml Zhermack Elite HD Base
1 X 90ml Zhermack Elite HD Catalyst

Direction to use

All standard and/or special trays can be used, provided they are rigid and non-deformable. The range of Zhermack’s Hi-Tray impression trays are especially recommended. Proper adhesion of the material to the impression tray is essential to avoid errors, especially during removal from the mouth. To ensure a strong bond, make sure that the adhesive is appropriate for the type and material of the tray.
Take the 2 components out of the tubs using the colour coded dosing spoons.
Mix identical proportions of Base and Catalyst; until you obtain a homogeneous mix, with no streaks (about 30 sec.). Then place into the impression tray.
Contact with latex gloves may prevent polysiloxanes from hardening. Avoid direct or indirect contact with latex gloves, Instead, wash your hands well to eliminate all traces of impurities or use vinyl gloves