Xcem Conical Impression Coping Transfer - Hex 4.8mm x 11mm (XCAICT-4811H)

• Tapered Design: Facilitates secure copings to implants.
• Closed Tray Compatibility: Supports accurate impression techniques.
• Easy Placement: Pre-manufactured for convenient, efficient use.
• Seamless Transfer: Transfers intra-oral locations with high precision.
• Reliable Connection: Ensures copings connect seamlessly to analogs.
• Consistent Impressions: Facilitates reliable implant restoration processes.

The Xcem Conical Impression Coping Transfer - Hex 4.8mm x 11mm (XCAICT-4811H)is an essential component in the transfer technique for dental implant procedures. Designed with precision and functionality in mind, these conical impression copings play a crucial role in creating accurate impressions for the fabrication of implant restorations. Utilizing a tapered design, the copings are employed in conjunction with a closed tray during the impression process. The copings are securely connected to the implants within the patient's jaw, enabling a meticulous impression to be taken and later separated from the oral cavity. Once the impression is obtained, the copings are detached and seamlessly connected to the implant analogs.  these impression copings serve as integral components in the transfer of intra-oral locations of implants or abutments from the patient's jaw to a corresponding position on a master cast within the dental laboratory. This precision transfer supports the creation of implant restorations, ensuring a seamless and accurate replication of the patient's dental anatomy.

• Type: Conical Impression Coping Transfer
  
• Compatibility: Hex 4.8mm
  
• Length: 11mm
  
• Tray Compatibility: Closed Tray
  
• Transfer Technique: Tapered Copings
  
• Application: Implant Impressions

• 1 x Conical Impression Coping Transfer

Directions for Use - Xcem Conical Impression Coping Transfer (XCAICT-4811H)

• Select Appropriate Size: Ensure you have the correct size of the Xcem Conical Impression Coping Transfer - Hex 4.8mm x 11mm (XCAICT-4811H) for your specific dental implant case.
• Prepare Patient: Prepare the patient for the impression procedure according to standard clinical protocols. Ensure the implant site is clean and free of debris.
• Insert Coping into Implant: Insert the conical impression coping into the implant site, ensuring a secure fit. Use the provided tool if necessary to facilitate proper placement.
• Impression Tray Placement: Position the closed tray over the copings, ensuring proper alignment. Carefully seat the tray onto the copings without dislodging them.
• Take Impression: Follow your standard impression-taking procedure with the closed tray in place. Ensure the impression material adequately captures the copings and surrounding structures.
• Separate Tray from Mouth: Once the impression material has set, carefully remove the tray from the patient's mouth. Ensure copings remain securely attached to the impression material.
• Remove Copings from Impression: Gently detach the copings from the impression material. Exercise caution to prevent any distortion of the impression.
• Connect Copings to Implant Analogs: Connect the copings to the corresponding implant analogs in the dental laboratory. Ensure a precise fit to replicate the intra-oral location accurately.
• Proceed with Master Cast Creation: Utilize the impression and connected copings to create a master cast in the dental laboratory. Follow standard procedures for model fabrication.
• Fabricate Implant Restoration: Use the master cast to fabricate the implant restoration according to the specific requirements of the case.

• Country Of Origin: United Kingdom
• Manufacturer: Xcem

• Warranty is not applicable for this product.

Question: What is the purpose of the Xcem Conical Impression Coping Transfer?
Answer: It facilitates precise transfer of intra-oral implant locations for accurate master cast creation.

Question: What implant size is compatible with this product?
Answer: The copings are designed for Hex 4.8mm implants.

Question: Can I use an open tray with these copings?
Answer: No, these copings are specifically designed for closed-tray impression techniques.

Question: Is the product pre-manufactured for immediate use?
Answer: Yes, the copings are pre-manufactured for convenient and efficient application.

Question: How do I secure the copings to the implants during the impression process?
Answer: The tapered design ensures a secure fit; a tool may be used for assistance.

Question: Can I use these copings for multiple implant cases?
Answer: Each coping is designed for single-use to maintain precision and hygiene.

Question: What material are the copings made of?Answer: The copings are made of [Specify Material]; please refer to product specifications.