Vishal Dentocare Perfomax RRM Putty (Pre-Mixed Mineral Troxide Aggregate)

• Pre-mixed MTA putty for hassle-free application.
• Adjustable initial setting time: 4-6 hours based on canal moisture.
• The final setting in 7 days ensures long-lasting stability.
• Low solubility (0.1%) for durable results.
• Simplified application with pre-mixed putty form.
• Application: Root canal repair, perforation repair, resorption, apexification, pulp capping.

• Composition: Tricalcium silicate, dicalcium silicate, zirconium oxide, bismuth trioxide, N-methyl-2-pyrrolidone.
• Setting Time: Initial: 30 min, Final: 24 hr.
• Working Time: >10 min.
• Radiopacity: Radiopaque.
• Solubility: Insoluble post-setting.
• Storage: 10°C to 24°C, away from moisture.

• 2 x Perfomax RRM Putty Syringe (1gm)

INSTRUCTION FOR USE :

• Prior to the application of Perfomax RRM Putty thoroughly prepare and irrigate the root
  canal using standard endodontic techniques.
• Remove the syringe cap from the syringe. Securely attach a Tip with a clockwise twist to the
  hub of the syringe. The disposable tip.
• Insert the tip of the syringe into the root canal. Gently and smoothly dispense the material
  into the intended anatomic section of the root canal by compressing the plunger of the
  syringe.
• Dispense the material while withdrawing the tip. Fill up intended root canal section
  completely avoid the formation of air bubbles and over fillings.
• Remove excess material with a moist cotton pellet.
• After each application, store the syringe into the fall pouch and ensure to seal the pouch.
  Store the pouch.

PERFORATION REPAIR :

• Perforations have the best chance of success the sooner they are repaired. Repair the perforation as soon as it occurs or is noted.
• After isolation with a rubber dam, the area surrounding the perforation should be thoroughly and carefully cleaned and disinfected.
• Obtain adequate hemostasis from the perforation site and apply the PerfoMax RRM Putty to the defect and seal all perforation margins.
• Remove any excess with a spoon excavator or a micro brush and create a flush peroration cavosurface.

PULP CAPPING :

• Indirect pulp caps have the best prognosis in cases of normal pulp or reversible pulpits. Do
  not attempt an indirect pulp cap in cases of irreversible pulpits.
• Isolate the operative area with a rubber dam.
• Prepare the cavity shape by removing any decay with a high speed bur under a constant
  cooling water spray.
• Before exposure occurs ( 0.5 – 1mm from the pulp), disinfect the internal surfaces of the
  cavity preparation and remove excessive moisture with a cotton pellet ( do not air dry).
• Place an adequate amount of PerfoMax RRM Putty over the affected dentin near the pulp,
  extending onto clean dentin.
• Remove excess with a spoon excavator or a micro brush.
• Place a thin layer of glass ionomer cement over the repair material extending laterally onto
  clean dentin.
• Once the glass ionomer is set, proceed to restore with a final restoration.

Direct :

• Once an exposure occurs, wash and disinfect the area thoroughly, control hemostasis and
  prepare the exposure site for repair with PerfoMax RRM Putty.
• Place an adequate amount of PerfoMax RRM over the perforation using a plastic instrument
  and remove excess with a curette and or Micro brush.
• It is recommended to fill the entire cavity with a reinforced glass ionomer core material and
  observe the tooth for 4-6 weeks before final restoration with a composite material. The
  Glass ionomer core can be used as a base during the subsequent visit.

Apexification :

• Isolate the operative area with a rubber dam.
• Open and debride the root canal, irrigate thoroughly and dry the root canal.
• If further disinfection is required, consider calcium Hydroxide therapy for a week.
• Place PerfoMax RRM Putty into the apical area of the root until an apical plug of at least 3-5
  mm in depth is created.
• Radiograph the placement of the material to ensure an adequate plug has been established.
• Fill the remaining root canal space.
  a. To fill in the same visit, consider using RRM to backfill the remaining portion of the canal.
  b. To fill with Gutta Percha during a subsequent visit, place a moist cotton pellet and
  provisional in the access and revisit in a week to fill the remaining portion of the canal with
  gutta percha.
• Restore the access opening with material of choice.
• PerfoMax RRM material will remain as permanent part of the root canal apexification
  repair.

• Warranty is not applicable for this product.

Question: Can this be used for Apexification?Answer: Indeed, Vishal Dentocare Perfomax RRM Putty (Pre-Mixed Mineral Troxide Aggregate) is specifically indicated for apexification procedures. Its versatile applications extend to root canal repair, perforation repair, resorption, and pulp capping, reflecting its suitability for a range of endodontic treatments.

Question: Can it be used for vital pulp therapy?
Answer: Yes, it is suitable for vital pulp therapy and apexogenesis.

Question: Is mixing required before use?Answer: No, the MTA putty comes pre-mixed for convenient application.

Question: How stable is the material once set?
Answer: The material exhibits low solubility of 0.1%, ensuring long-term stability.

Question: What is the setting time of the pre-mixed MTA putty?
Answer: The initial setting time is 4-6 hours, with the final setting in 7 days.