Ultradent Uveneer Template Refills

• Allows for predictable, high-quality, natural-looking composite restorations
• Prevents the oxygen inhibition layer during curing process resulting in a hard, glossy surface
• Allows light to pass through the template to the composite for effective curing
• Works with any preferred composite
• Releases easily from cured composite resin
• Requires minimal adjusting or polishing—saving time
• Can be used on individual or multiple teeth
• Templates are autoclavable and reusable, making it cost effective for both patients and dentists
• Can enhance practice efficiency
• Each template is numbered to correspond with the tooth number, tooth size, and upper and lower arch.

• Template Material: Translucent Medical-grade Plastic 
• Coating: Nonstick
• Sterilization: Autoclavable (Maximum temperature: 137°C / 278°F)
• Anatomical Design: Mimics Ideal Tooth Anatomy (Height-to-Width Ratio, Contour, Embrasure, Center Midline)
• Applications: Direct Composite Veneer, Cosmetic Mock-ups, Shade Selection, Temporaries, Class 3, 4, and 5
• Curing Process: Allows Light Transfer from Curing Light through to Composite 

• 1 x Uveneer Template Refill

Step 1

• Choose Mosaic universal composite or preferred composite shade(s). Select the template that corresponds with the tooth being restored. See the handle of the template for the corresponding tooth number, size, and arch.

Step 2

• Remove all caries if needed and minimally prepare the tooth.​

Step 3

• Place interproximal separating matrices and apply Ultra-Etch etchant, Peak SE Primer, or preferred etch.

Step 4

• Rinse etchant gel

Step 5

• Apply Peak Universal Bond adhesive or preferred adhesive to tooth surface.

Step 6

• Light cure with LED curing light

Step 7

• 
  Apply Mosaic universal composite or preferred composite directly onto the tooth.

Step 8

• ​Do not light cure composite.

Step 9

• ​Select chosen Uveneer template. Template should ideally cover the entire facial surface of the tooth. If not, additional composite may be used at the periphery to compensate.

Step 10

• Align centerline of template parallel to the midline of the face and perpendicular to the incisal plane. Using thumb, press the concave side of the selected template onto the tooth. Press firmly to remove any trapped air

Step 11

• Remove any excess composite from the periphery.

Step 12

• ​Using VALO curing light, cure composite through template. For every 2mm layer, cure 1–2 x 10 seconds on Standard Power, 1–2 x 4 seconds on High Power, or 1–2 x 3 seconds on Xtra Power.

Step 13

• ​Remove the Uveneer template by gently lifting the handle. Using VALO curing light do final cure directly onto composite. To ensure composite is cured thoroughly, for every 2mm layer, cure 3 x 10 seconds on Standard Power, 3 x 4 seconds on High Power, or 3 x 3 seconds on Xtra Power.

Step 14

• Avoiding the glossy facial surface, trim excess composite from periphery with a fine flameshaped bur in Jiffy™ Composite Finishing Bur Kit. Use Jiffy™ Composite Polishers, Brushes, Diamond Strips, or Proximal Saws for minimal finishing and adjusting if desired.

Step 15

• ​Immediately after use, thoroughly wipe template with alcohol pad, dry, bag, and autoclave according to Uveneer template IFU. Do not leave any composite residue on the template in order to maintain translucency and shine.

Question: How many shapes and sizes templates will I get?
Answer: The Ultradent Uveneer Template Refills come in two sizes: medium and large. Each variant corresponds to a specific tooth number, and you can choose the variant you need. The templates are available individually, allowing you to select the specific variant for your requirement.

Question: How do Uveneer templates work?

Answer: ​The translucent templates are pressed over composite that has been laid on the tooth after etching and bonding. The templates are removed after the material has cured, thus creating a perfect, contoured, shiny surface. Uveneer templates are easy to handle, have a nonstick surface, and are autoclavable and reusable.

Question: What curing light works best with Uveneer templates?
Answer: Any curing light can be used with Uveneer templates. However, VALO curing light is the optimal choice because of its quality and durability.

Question: What type of composite should I use?

Answer: Uveneer templates are compatible with any desired composite and any layering technique

Question: Can Uveneer templates increase practice profitability?
Answer: Yes! Dentists who use Uveneer templates report that they are performing many more composite veneer procedures than before because they find the process so quick and easy—and affordable for their patients, which has led to higher case acceptance

Question: Are Uveneer templates reusable? Autoclavable?
Answer: Yes, the templates should be autoclaved after each use and can then be reused

Question: What are the main advantages of using Uveneer templates?

Answer: ​You can use any preferred composite material, and the results are consistent and predictable with regard to final tooth shape, shine, and smile design that otherwise would be difficult or impossible to accomplish. It is very easy to use, saves valuable time because there is no need to spend time carving or polishing, and you only need minimal tooth preparation. It is also cost-effective for both patients and dentists