Ultradent Opalescence Boost Pf 40% Single Syringe # 4754-1

• Chemically activated, so no light is needed
• Powerful 40% hydrogen peroxide gel
• Opalescence tooth whitening gel contains PF (potassium nitrate and fluoride). Potassium nitrate has been shown to help reduce sensitivity. Fluoride has been shown to help reduce caries and strengthen enamel.
• Fresh chemical for each application
• Its thick viscosity formula prevents the gel from running, hence helps precise application.
•  Its noticeable red color makes it easily visible to aid in accurate placement and complete removal.
• Two to three 20-minute applications for a total of 40 minutes of treatment time​.

• Whitening Agents: Clear, flavored, high-viscosity, sticky gels containing carbamide peroxide
• Additional Ingredients: Potassium nitrate and sodium fluoride<br>Significant water content to prevent dehydration
• Gluten-free and Kosher: All Opalescence whitening products are gluten-free and kosher
• Wear Times: Varying wear times depending on gel concentration and patient needs

• 1 x 1.2 ml Opalescence Boost/Activator syringes

Step 1

Place protective eyewear and clothing on yourself and the patient to prevent contact with the whitening agent. Check to see that the syringes are securely attached before mixing. To mix, follow the instructions on the reverse side.

Step 2

Press all mixed gel into the RED syringe. Separate the two syringes and attach the Black Mini™ tip or other recommended tip onto the red syringe. Check the flow on a cotton gauze or pad prior to applying it intraorally. If resistance is met, replace the tip and recheck the flow.

Step 3

Place Ultradent IsoBlock™ bite block and self-supporting plastic cheek retractors. Completely rinse and air dry teeth and gingiva.

Step 4

Securely attach a Black Mini tip to OpalDam™ Green resin barrier and check flow. Express a continuous bead along the gingival margin, overlapping approximately 0.5 mm onto the enamel. Begin and finish the bead one tooth beyond the most distal tooth that is being whitened. Express the resin through any open embrasures.

Step 5

Light cure the OpalDam Green resin barrier for 20 seconds per arch using a scanning motion. Check the resin cure with an instrument using caution not to disrupt the seal.

Step 6

Apply a 0.5–1.0 mm thick layer of gel to the labial surface of the teeth. Allow the gel to remain on the teeth for 20 minutes per application.

Step 7

Suction gel from teeth using the Ultradent™ Luer Vacuum Adapter and SST™ tip or a surgical suction tip. Do not use water. Repeat steps 6–7. Stop when desired results are achieved, or if the three applications per visit maximum has been met.

Step 8

After the final application is complete and all visible gel is removed, thoroughly rinse teeth with an air/water spray and the high volume suction.

Step 9

Gently slide the tip of a dental instrument beneath the OpalDam resin barrier and lift it off. Check for and remove any interproximal remnants.

Step 10

Evaluate the shade change. If additional whitening is desired and no significant sensitivity is noted, reschedule the patient in 3–5 days for repeat treatment or dispense take-home whitening treatment.

• Country of Origin: United States of America
• Manufacturer: Ultradent

• Warranty is not applicable for this product.

Question: If the solution remains after the procedure, can it be kept and used for another patient after a few days?
Answer: Yes, the remaining solution of Ultradent Opalescence Boost PF 40% Single Syringe #4754-1 can be kept for future use. However, it's important to adhere to the recommended guidelines. Opalescence Boost in-office whitening should be utilized within 10 days of mixing, and it's advised to store the solution refrigerated between uses to maintain its efficacy and safety standards.

Question: Does this pack also includes opal resin dam?
Answer: No, the Ultradent Opalescence Boost PF 40% Single Syringe #4754-1 does not include an opal resin dam. To acquire the opal resin dam, you would need to search for the Ultradent Opalescence Boost PF 40% Plus Mini Kit #4751-1 on Oralkart.

Question: What is Ultradent Opalescence Boost PF 40% Single Syringe?
Answer: This is an in-office power teeth whitening product designed to provide brighter and whiter teeth. It uses a chemically activated gel containing 40% hydrogen peroxide for effective whitening.

Question: How does the chemically activated gel work without a light?
Answer: The chemically activated gel in Ultradent Opalescence Boost PF 40% Single Syringe eliminates the need for a hot, uncomfortable light. Its unique formulation ensures effective whitening without external light sources.

Question: What is PF in the Opalescence teeth whitening gel?
Answer: PF stands for potassium nitrate and fluoride, which are ingredients included in the gel to not only whiten teeth but also contribute to oral health.

Question: How is the gel activated for application?
Answer: The gel is activated just before application using the double-syringe configuration. This ensures that every application of Opalescence Boost is fresh and potent.

Question: How is the application process made precise?
Answer: The product comes with a Black Mini™ Tip that aids in precise delivery, making sure the gel is applied accurately for optimal results.

Question: How long does each application take?

Answer: Each application typically lasts for 20 minutes, and it is recommended to perform two to three applications to achieve the desired level of whitening.