U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine

• Heating Element: Evenly heats the thermoplastic sheets, making them pliable and ready for molding.
• Vacuum Chamber: The machine has a vacuum chamber where the thermoplastic sheet is placed for molding. It creates a negative pressure environment to ensure a tight and precise fit around the dental model or impression.
• User-Friendly Interface: The machine features a user-friendly interface with clearly labeled buttons or switches for easy operation.
• Adjustable Platform: The machine typically has an adjustable platform where the dental model or impression is placed, allowing for proper alignment and positioning.
• Compatibility with Various Dental Appliances: The machine is designed to accommodate the fabrication of different dental appliances such as sports mouth guards, bleaching trays, orthodontic appliances, and indirect bonding trays.
• Compact and Durable Design: The machine is compact and sturdy, making it suitable for use in dental clinics or laboratories. It is built to withstand frequent use and provide long-lasting performance.

TECHNICAL SPECIFICATIONS :

• Dimension: 25x21x30cm
• Thermo forming material size: 5" x 5"
• Voltage: 110V/60Hz
• Power supply: 1000W
• Machine weight: 6kg

• 1 x Dental Vacuum Suction Unit
• 1 x Pack of Beads
• 1 x Instruction manual

Safety Precautions:

• Before using the machine, ensure that you have read and understood the instructions and safety guidelines.
• Wear appropriate personal protective equipment, such as gloves and safety glasses, to protect yourself during the process.

Prepare the Thermoplastic Sheets:

• Select the appropriate thermoplastic sheet for the desired dental appliance.
• Cut the sheet into the required size and shape, allowing for proper coverage of the dental model or impression.

Preheat the Machine:

• Plug in the machine and turn ON the power.
• Adjust the temperature settings based on the recommendations provided by the manufacturer and the type of thermoplastic material being used.
• Allow the machine to preheat until the desired temperature is reached. This usually takes a few minutes.

Position the Dental Model or Impression:

• Place the dental model or impression on the platform of the machine, ensuring that it is centered and properly aligned.

Place the Thermoplastic Sheet:

• Carefully place the pre-cut thermoplastic sheet over the dental model or impression.
• Make sure that the sheet covers the entire area to be molded and that there are no wrinkles or folds.

Engage the Vacuum:

• Close the lid or cover of the machine securely, creating a sealed chamber.
• Activate the vacuum function by pressing the appropriate button or switch.
• The vacuum will create suction, pulling the thermoplastic sheet tightly around the dental model or impression.

Molding Process:

• Close the lid or cover of the machine securely, creating a sealed chamber.
• Activate the vacuum function by pressing the appropriate button or switch.
• The vacuum will create suction, pulling the thermoplastic sheet tightly around the dental model or impression.

Release the Vacuum and Remove the Molded Appliance:

• Once the desired molding time has elapsed, release the vacuum by turning off the machine or pressing the appropriate button.
• Open the lid or cover of the machine, exposing the molded appliance.
• Carefully remove the molded appliance from the dental model or impression, ensuring that it retains its shape and accuracy.

Trimming and Finishing:

• Trim any excess material from the molded appliance using dental instruments or scissors, following the specific instructions for the intended dental appliance.
• Smooth and finish the edges of the appliance as necessary, ensuring patient comfort and functionality.

Clean and Maintain the Machine:

• After each use, clean the machine.
• Remove any residual material or debris from the vacuum chamber and heating element.
• Store the machine in a safe and dry place to prevent damage.

• Country of Origin: Made in PRC

• Manufacturer/Importer warranty of 1 Year against manufacturing defect
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Oralkart will be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

Question: How to claim warranty?
Answer: To claim warranty for the U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine, please contact support@oralkart.com. The dedicated team will provide you with the necessary guidance and assistance regarding the warranty process.

Question : What thickness of sheets can the U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine accommodate?
Answer: The U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine is suitable for producing sheets of different materials up to 6mm in thickness and can accept both round and square shapes.

Question : Can we use circular sheets?
Answer: Yes, you can use circular sheets with the U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine.

Question : Do we need a compressor with it, or this alone is enough for making essix retainers for ortho patients ?
Answer: The U Ortho VacuMold Portable Dental Vacuum Forming/Molding Machine does not require a separate compressor. It is a self-contained unit that is sufficient for making Essix retainers for orthodontic patients. This convenient and portable machine allows dental professionals to create dental appliances without the need for additional equipment, offering efficiency and ease of use.

Question : How does a dental vacuum forming/molding machine work?
Answer: These machines consist of a heating element and a vacuum chamber. The heating element warms thermoplastic sheets, making them pliable. The heated sheets are then placed in the vacuum chamber, where negative pressure is applied, allowing them to conform tightly around a dental model or impression.

Question : What types of dental appliances can be made using a dental vacuum forming/molding machine?
Answer: Dental vacuum forming/molding machines can be used to fabricate various appliances, including sports mouth guards for athletes, bleaching trays for teeth whitening treatments, orthodontic appliances or retainers for maintaining tooth position, and indirect bonding trays for precise bracket placement during orthodontic treatment.

Question : Can different thermoplastic materials be used with these machines?
Answer: Yes, dental vacuum forming/molding machines are compatible with a variety of thermoplastic materials. The specific type of material used depends on the intended dental appliance and the patient's needs. Examples of thermoplastic materials include ethylene vinyl acetate (EVA), polyethylene, and copolyester.

Question : Are dental vacuum forming/molding machines easy to use?
Answer: Yes, these machines are designed to be user-friendly. They typically have intuitive interfaces with clear controls for temperature, vacuum strength, and timing. However, it is important to carefully follow the manufacturer's instructions and guidelines for safe and effective operation.

Question : Are there any safety precautions to consider when using a dental vacuum forming/molding machine?
Answer: Yes, it is important to follow safety precautions when using these machines. Wear appropriate personal protective equipment, such as gloves and safety glasses, to protect yourself during the process. Additionally, be mindful of the temperature settings to prevent overheating and follow proper maintenance procedures for safe operation.