Sparedent Korox 50 Powder for Sandblaster/Polisher

• Alpha corundum with high hardness properties ensures effective cleaning and stripping capabilities.
• Suitable for use with sandblasters and polishers for efficient removal of investment material residues and oxides.
• Does not react with surfaces, making it safe and reliable for a variety of materials and applications.
• Optimal for conditioning surfaces of non-precious alloys prior to ceramic firing, ensuring optimal adhesion and finish.
•  Effective in creating a matte surface finish, enhancing aesthetic outcomes in dental and industrial settings.
• Designed as a reusable media that remains effective over extended periods, reducing operational cost.
• Used widely in dental laboratories and clinics for its durability, effectiveness, and consistent results.

• Category: Dental Abrasives 
• Type: Powder for Sandblaster 
• Composition: Aluminium Oxide 
• Form: Alpha Corundum (α-Al2O3)
• Particle Size: 50μm
• Weight: 100gm

• 1 x 100g Sparedent Korox 50 Powder for Sandblaster/Polisher

Preparation:

• Ensure the sandblasting equipment is clean and in good working condition.
• Verify that the sandblasting chamber is free from residual materials.

Loading the Powder:

• Pour a sufficient amount of Korox 50 powder into the sandblaster reservoir or chamber.

Adjusting Pressure and Nozzle:

• Adjust the sandblasting pressure according to the manufacturer's recommendations.
• Select an appropriate nozzle size to achieve the desired blasting effect and coverage.

Application:

• Direct the sandblasting nozzle towards the surface to be treated, maintaining a consistent distance for uniform coverage.
• Move the nozzle in controlled, overlapping strokes to ensure thorough cleaning and stripping.

Monitoring and Adjustment:

• Periodically check the abrasive flow and adjust as needed to maintain optimal blasting efficiency.
• Monitor the surface condition throughout the process to achieve the desired matte finish or surface preparation.

Safety Precautions:

• Wear appropriate personal protective equipment (PPE), including safety goggles and gloves, to protect against abrasive particles.
• Ensure adequate ventilation in the workspace to minimize dust exposure.

Cleaning and Storage:

• After use, thoroughly clean the sandblasting equipment and nozzle to prevent clogging and maintain performance.
• Store Korox 50 powder in a dry, sealed container away from moisture and contaminants.

Disposal:

• Dispose of used powder and any waste materials in accordance with local regulations for abrasive materials.

• Warranty is not applicable for this product.

Question: Can this be used with the chair side air polisher or does it need a dedicated sand blaster?Answer: The Sparedent Korox 50 Powder for Sandblaster/Polisher requires a dedicated sandblaster for optimal results and is not suitable for use with a chairside air polisher. It is specifically designed for use in dental laboratories.

Question: What is the composition of Korox 50 Powder?
Answer: Korox 50 Powder is composed of 99.6% alpha aluminum oxide, known for its exceptional hardness and sharp-edged particles.

Question: How effective is Korox 50 Powder in achieving surface finishes?
Answer: It is highly effective in creating a matte surface finish, which enhances aesthetic outcomes in both dental laboratories and industrial applications.

Question: How should Korox 50 Powder be stored?Answer: Store Korox 50 Powder in a dry, sealed container to prevent contamination and maintain its abrasive properties over time.

Question: What is the particle size of Aluminium oxide ?
Answer: The particle size of the aluminum oxide in Sparedent Korox 50 Powder for Sandblaster/Polisher is 50 microns. This particular size is suitable for various dental applications, providing effective abrasion and polishing properties during sandblasting procedures.