Shofu Hy-Bond Glasionomer Cx Glass Ionomer Luting Cement

• Chemical composition: The cement is made from a unique combination of glass powder and a liquid solution of organic acids and water, resulting in a high-strength glass ionomer cement.
• Radiopacity: The cement is radiopaque, allowing for easy detection on X-rays.
• Fluoride release: The cement releases fluoride ions, which can help to prevent tooth decay and improve overall oral health.
• Adhesion: The cement is designed to bond chemically to the tooth structure and metal, providing a strong and durable seal.
• Low solubility: The cement has low solubility, ensuring a strong bond between the tooth and the restoration.
• Working time: The cement has a working time of 1 minute and a setting time of 3 minutes, allowing for efficient and timely completion of restorative procedures.

Cleaning of Abutment Tooth:

• Thoroughly remove any temporary material and rinse with water. Dry the area following standard procedures.

Isolation:

• Use a rubber dam or similar method to isolate the treatment area.

Try-in and Preparation of Restoration:

• Try-in the restoration to confirm fit and adjust occlusion as needed.
• Clean the adhesive surface of the restoration.

Pulp Protection (if necessary):

• If the restoration is close to the pulp, apply a pulp protection material like calcium hydroxide.

Dispensing of Powder and Liquid:

• Dispense 1 scoop of Powder and 2 drops of Liquid separately.
• Use the provided measuring scoop and level off the powder for accuracy.
• Invert the liquid bottle before use to dispense bubble-free liquid. Avoid contact between the nozzle tip and the mixing pad.
• Close both bottle caps tightly after each use to prevent moisture contamination.

Mixing:

• Mix the Powder and Liquid evenly with a plastic spatula within 30 seconds.
• The working time is approximately 2 minutes from the start of mixing.
• The setting time at 37°C is approximately 2 minutes and 30 seconds after seating the restoration.

Placement of Restoration:

• Apply the mixed cement evenly on the restoration surface to be cemented.
• Seat the restoration onto the abutment tooth with moderate pressure.
• Hold it in place until the cement sets, which is about 2 minutes and 30 seconds.

Removal of Excess Cement:

• Once the cement exhibits a rubbery consistency (about 1-2 minutes after placement), remove excess cement with an instrument

Shofu Hy - Bond Glasionomer Cement Cx Mini Set:

• 1 x 15g Powder
• 1 x 10g (8.3ml) Liquid

Shofu Hy - Bond Glasionomer Cement Cx 1-1 Pack:

• 1 x 45g Powder
• 1 x 30g (25ml) Liquid

• Preparation: Prepare the tooth or teeth to receive the restoration according to standard procedures, and clean and dry the area to be restored.
• Mixing: Mix the glass powder and liquid solution according to the manufacturer's instructions, using a mixing pad and spatula.
• Application: Apply the cement to the restoration, and carefully seat the restoration onto the prepared tooth or teeth, using firm pressure to ensure proper fit.
• Cleanup: Remove any excess cement from around the restoration, and cure the cement using a curing light if necessary.
• Finishing: Finish and polish the restoration as needed, and instruct the patient on any post-operative care instructions.

• Country of Origin: Japan
• Manufacturer: Shofu

Question: What is the quantity of powder and liquid included in the mini pack of Shofu Hy-Bond Glasionomer Cx Glass Ionomer Luting Cement?Answer: The mini pack of Shofu Hy-Bond Glasionomer Cx includes 15g of powder and 10g (8.3ml) of liquid. This combination provides the necessary materials for effective luting in various dental applications.

Question: Is light curing is necessary for the cement to set?
Answer: No, light curing is not necessary for the Shofu Hy-Bond Glass Ionomer Luting Cement to set. The cement sets through a chemical reaction and does not require additional light curing for its curing process.

Question: Can Shofu Hy-bond glass Ionomer cement be used in cementing zirconia crowns?Answer: Yes it can be used however for zirconia crowns, it is advisable to use a resin cement specifically formulated for zirconia restorations to ensure a strong and durable bond.

Question: How long does Shofu Hy-Bond Glass Ionomer Cement take to set?
Answer: Shofu Hy-Bond Glass Ionomer Cement has a working time of 1 minute and a setting time of 3 minutes.

Question: Is Shofu Hy-Bond Glass Ionomer Cement radiopaque?
Answer: Yes, Shofu Hy-Bond Glass Ionomer Cement is radiopaque, which allows for easy detection on X-rays.

Question: Can Shofu Hy-Bond Glass Ionomer Cement be used in pediatric dentistry?
Answer: Shofu Hy-Bond Glass Ionomer Cement is suitable for use in pediatric dentistry, and its fluoride-release properties can help to prevent tooth decay in children.