Shofu Coat-It Resin Coat 6ml

• Remarkably Natural Surface Gloss With Just 10 Seconds Of Cure.
• High Degree Of Surface Cure With Minimal Residual Monomer.
• Seals, Protects And Strengthens Surface Of Glass Ionomers, Provisional Restoration And Direct Resins.
• Remarkable Wear And Stain Resistance For Restorations That Remain Stable Over Time.
• Exceptionally Strong And Durable Bond To Various Substrates- To Enamel, Dentin, Glass Ionomer And Resins With Virtually No Gap.

• Remarkable stain resistance(Virtually no colour difference ΔE) - Immersion in 1.0% Rhodamine solution at 37°C for 24 hours
• Strength & Durability - Enhanced with just a coat of Coat It!
• Recommended Light Curing Time (immediately after application):

Curing Unit  Halogen LED
Curing Time 10 sec. 10 sec.
Wavelength 400 - 500 nm 440 - 490 nm
Light intensity Min. 500 mW/cm2 or more Max. 1000 mw/cm2 or more

•  1 x 6ml (6.6gm) Coat-It

• Prepare the tooth: The tooth should be cleaned and prepared by removing any decay or damage. The surface of the tooth should be free of debris and moisture.
• Apply the GIC: The GIC is mixed and applied to the prepared tooth, filling any cavities or defects. The GIC is then allowed to set for the recommended time.
• Prepare the surface: Once the GIC is set, the surface of the tooth is cleaned and prepared for the application of the light cure resin coat. The surface should be dry and free of debris.
• Apply the resin coat: The light cure resin coat is applied in thin layers over the surface of the GIC using a dental instrument. Each layer is cured with a special light before applying the next layer.
• Cure the resin coat: After the final layer of resin is applied, the entire surface is cured with the light to ensure proper hardening and bonding to the GIC.
• Polish the surface: Once the resin coat is cured, the surface of the tooth is polished to a smooth finish .
• Post-treatment care: The patient should avoid eating or drinking for at least 30 minutes after the procedure to allow the resin coat to fully harden. The patient should also avoid hard or sticky foods for at least 24 hours after the procedure.

• Country of Origin: Japan
• Manufacturer: Shofu

Question: What are advantages of using Shofu Coat-It?
Answer: Remarkable Surface Gloss - COAT-IT is easily and completely cured to a natural gloss with both LED and Halogen light curing sources within 10 seconds, leaving very little residual uncured monomer.Exceptionally Strong Bond - COAT-IT exhibits an equally strong adhesion to different substrates such as Enamel, Dentin and GIC, with virtually no gap, even when observed under high magnification.

Question: What is the purpose of light cure resin coat?
Answer: The purpose of light cure resin coat is to protect the tooth from decay, sensitivity, and other forms of damage.

Question: How is light cure resin coat applied?Answer: First clean and prepares the surface of the tooth. The resin is then applied in layers and each layer is cured with a curing light to harden it. After the final layer is applied and cured, the surface is polished to a smooth finish.