Samit X-Ray Fixer Powder

Note: In fresh solution fixing time is 3 min do not fix for more than 10 min. Prolonged fixing may have bleaching effect on the silver.

Caution: Use of rubber hand gloves or frequent rinsing of hands is recommended.

• 1 x Fixer Powder 260 gm

• Take 750ml water at 30° to 40° C in a glass or plastic vessel.
• Add the chemical of larger packet in it and stir well.
• Add the chemical of smaller packet to dissolve it completely.
• Add 250ml water (30° to 40° C) to make the solution 1 litre.
• Now fixer is ready.

• This product is NON-RETURNABLE/NON-REFUNDABLE. In case of any defective or damaged product, compensation for the same will be provided. Damage or defect in the product need to be ascertained prior to issuing compensation.

Question: What is self life of fixer liquid once made ready to use?
Answer: The shelf life of the fixer liquid, once prepared and ready to use, can vary depending on storage conditions. Generally, if stored properly in a tightly sealed container, it can remain usable for several days to months.

Question: What precautions should be taken when using Samit X-Ray Fixer Powder?
Answer: It is recommended to use rubber gloves or frequently rinse hands when handling the fixer to avoid skin irritation. Ensure to follow the safety guidelines to maintain a safe working environment.

Question: How is Samit X-Ray Fixer Powder used?
Answer: To prepare the fixer, start with 750ml of water at 30° to 40°C in a suitable vessel. Add the contents of the larger packet and stir well. Then, dissolve the contents of the smaller packet completely. Finally, add 250ml of water at 30° to 40°C to make the solution up to 1 liter. The fixer is now ready for use.

Question: What are the components of Samit X-Ray Fixer Powder?
Answer: The fixer is composed of Sodium/Ammonium Thiosulfate as the fixing agent, Potassium Alum as the hardener, and Sulfuric/Acetic Acid as the acidifier. These components work together to ensure fast and effective fixation of the radiographic image.