SafeEndo ReCreate LC

• Excellent polishing
• Does not stick to instrument
• Keeps stable at modeling
• Excellent radiopacity
• Fluorescence
• High surface hardness
• High pressure resistance
• Higher filler content and lower polymerization shrinkage.
• Superior handling and easy to apply

• 1 x ReCreate LC 4.5gm

• Preparation
  Before restoration, dental tissues should be cleaned with non-fluoride paste.
• Selection of shade
  When selecting the shade of restoration material, the surface of restored tooth should be cleaned and moisturized. The intensity of the color of restorative material depends on its thickness. To test the material of selected shade apply it on untreated surface of the tooth. Estimate the compliance of the shade with tooth colour under different lights, then remove material from the surface of the tooth.
• Isolation
  To ensure good adhesion of material, tooth surface must be thoroughly dried and prepared. For isolation can be used rubber dam or cotton rolls and saliva ejector.
• Cavity preparation
  Cavity is prepared according to the general rules of adhesive technology. It is necessary
  to round the corners, appeared during preparation. In case of deep cavity, for pulp capping apply calcium hydroxide material and isolate it with glass ionomer cement.
• Adhesive application
  Prepared tooth surface should be treated with etching gel based on 37 % phosphoric acid. Gel is applied first on the enamel surface, and after 5-10 seconds on the dentin surface. In 15-20 seconds gel should be washed out with water. Dry the surface with compressed air. In case of saliva contact with etching gel or dried tooth surface, repeat etching procedure, then rinse and dry the surface.
• Bonding agent ReCreate Bond 5 / ReCreate Bond 7 is applied with 2-3 coats on the prepared surface of the tooth by gently rubbing for 15 seconds. Then gently dry adhesive with air for 5-10 seconds for solvents evaporation. Do photopolymerization with 400-500 nm wavelengths light for 20 seconds.
• Application of composite and curing
  Composite material ReCreateLC should be applied and cured layer by layer to reduce shrinkage of the material.

Question: How does SafeEndo ReCreate LC achieve excellent aesthetics in restorations?
Answer: SafeEndo ReCreate LC offers excellent polishing capabilities and comes in a wide range of VITA shades with three levels of opacity to simulate dental tissues accurately. Its fluorescence and color stability contribute to natural-looking restorations that blend well with the surrounding teeth.

Question: What makes SafeEndo ReCreate LC unique in terms of application and handling?
Answer: SafeEndo ReCreate L is known for its superior handling and ease of application. It does not stick to instruments, maintains stability during modeling, and can be polished to a high shine, simplifying the restoration process for dental professionals.

Question: What is SafeEndo ReCreate-LC, and what are its primary uses?
Answer: SafeEndo ReCreate-LC is a nano-hybrid radiopaque light-cured composite designed for various dental restorative procedures. It is suitable for the restoration of all cavity classes according to Black, core build-ups, splinting, correction of composite restorations, and fabrication of indirect restorations like inlays, onlays, and veneers.