SafeEndo GlassyLute Luting GIC

• High Biocompatibility: Ensures compatibility with tooth tissues, reducing the risk of adverse reactions.
• 185MPa Strength: Offers a robust level of strength, providing durable fixation for dental restorations.
• Acid Erosion Resistance: Withstands acidic environments, maintaining its integrity and longevity.
• Prolonged Anticaries Effect: Contains a fluorine-containing glass filler that accumulates and releases fluorine ions, contributing to long-lasting protection against cavities.

Composition:

• Fluoroaluminosilicate glass powder, Modificator
• Polyacrylic acid, Maelic acid, Tartaric acid (Liquid)

Properties:

• High biocompatibility
• 185MPa strength
• Acid erosion resistance
• Fluorine-containing glass filler for anticaries effect

Indications:

• Crowns
• Dental bridgework
• Inlays
• Onlays
• Orthodontic Brackets

Method of Use:

• Surface preparation
• Mixing
• Application

Storage:

• Temperature: 5°C to 25°C
• Dry place, away from humidity
• Shelf life: 3 years

• 1 x Powder (35g bottle)
• 1 x Liquid (25g bottle)
• 1 x Measuring spoon
• 1 x Mixing pad

Surface Preparation:

• Ensure the tooth stump is prepared, cleaned, and dried.
• Treat the tooth stump with conditioner using an applicator (cotton ball or sponge) for 10-15 seconds.
• Thoroughly clean the cavity with water for 10-15 seconds and dry it slightly until a glossy surface is achieved. Do not over-dry.

Mixing:

• Shake the jar of powder before use without turning it over, tapping on your palm.
• Mix the powder with the liquid on a mixing pad or glass plate using a plastic or metal spatula at room temperature (18-23°C).
• Follow the recommended ratio of powder to liquid (1.4g powder to 1.0g liquid).
• Mix for 30-45 seconds until a plastic consistency is obtained.

Application:

• Insert the material into the crown and fix it on the prepared tooth stump without over-compressing.
• Patient should articulate and apply constant pressure until the material hardens (2.0-2.5 minutes).
• Remove excess material and ensure a snug fit.

Post-Application:

• Advise the patient not to eat for 2 hours after application.
• Clean metal instruments immediately after use.
• Tightly close the container after each use.
• In case of contact with eyes, skin, or oral tissues, remove the material immediately and wash with water.

• Warranty is not applicable for this product.

Question: What is SafeEndo GlassyLute used for?
Answer: SafeEndo GlassyLute is used for fixation in dental procedures, including crowns, dental bridgework, inlays, onlays, and orthodontic brackets.

Question: What are the key properties of SafeEndo GlassyLute?
Answer: SafeEndo GlassyLute boasts high biocompatibility, 185 MPa strength, acid erosion resistance, and a prolonged anticaries effect.

Question: How long does SafeEndo GlassyLute take to harden?
Answer: SafeEndo GlassyLute typically hardens within 4-5 minutes after the start of mixing.

Question: What is the recommended storage condition for SafeEndo GlassyLute?
Answer: SafeEndo GlassyLute should be stored in a dry place at a temperature between 5°C and 25°C, away from humidity.

Question: Can SafeEndo GlassyLute be used on allergic patients?Answer: SafeEndo GlassyLute should be used with caution on allergic patients, and any drug idiosyncrasy should be considered before use.

Question: How long is the shelf life of SafeEndo GlassyLute?
Answer: The shelf life of SafeEndo GlassyLute is 3 years if stored correctly and used before the expiry date.

Question: What should be done in case of eye or skin contact with SafeEndo GlassyLute?
Answer: In case of contact with eyes, skin, or oral tissues, remove the material immediately and wash with water.

Question: Can SafeEndo GlassyLute be used for metal-free restorations?
Answer: Yes, SafeEndo GlassyLute's aesthetic properties make it suitable for fixation of metal-free crowns and bridges made of high-strength ceramics.