Reliance Ortho Rely-a-Bond Paste Thin in 3.5 Gms Syringe

• One-Step Contact Adhesive Solution: Simplifies the bonding process by providing a complete adhesive solution in a single step.
• Chemical Cure – No Light Required: Offers the convenience of chemical curing, eliminating the need for additional light-curing equipment.
• Time and Material Savings: Does not require mixing, saving valuable time during orthodontic procedures and reducing material wastage.
• Highly Filled Paste: Formulated with a highly filled composition to ensure maximum bond strength between orthodontic appliances and tooth surfaces.
• Tacky Viscosity: Prevents bracket drift and facilitates precise placement, enhancing the overall effectiveness of the bonding process.
• Cost-Effective Usage: Minimizes adhesive per bond, resulting in cost savings without compromising on bond strength or performance.

• Application Method: Syringe
• Viscosity: Thin
• Bonds to: Ceramic, Metal, Porcelain and Composite Attachments
• Usage: Direct Bonding
• Color: Clear Paste
• Material: Fluorescing Light Cure Orthodontic Adhesive

Storage:

• Store at room temperature (15-25°C) Avoid excessive heat. Allow product to reach room temperature prior to use.

• 1 x 3.5gm Syringe

Preparation:

• Ensure the tooth surface is clean and dry.
• Prophy the enamel surfaces as needed.

Primer Application:

• Apply a thin layer of primer onto the prepared tooth surface.
• Hold in place for a few seconds to allow the paste to set.

Paste Application:

• Dispense a small amount of Rely-a-Bond Paste Thin from the syringe directly onto the bracket base or tooth surface.

Bracket Placement:

• Carefully position the orthodontic bracket onto the tooth surface, ensuring proper alignment.
• Press firmly to secure the bracket in place.

Curing (Optional):

• Unlike other bonding agents, Rely-a-Bond Paste Thin does not require curing with a light source. It chemically cures over time.

Cleanup:

• Remove any excess adhesive or flash using appropriate instruments.
• Ensure thorough cleaning and polishing of the bonded area.

Final Inspection:

• Verify the placement and integrity of the bonded bracket.
• Confirm adequate adhesion and bond strength before proceeding with further orthodontic procedures.

Repeat as Needed:

• Follow the same procedure for each additional bracket placement as required for the treatment plan.

Documentation:

• Record the details of the bonding procedure in the patient's treatment chart for future reference.

• Country of Origin: United States of America
• Manufacturer: Reliance Ortho Products Inc.