Prevest Oratemp Ne Manual-Mix

• Excellent physical properties
• Easy to mix - easy to clean
• Low solubility in oral fluids
• Increased patient comfort
• Can remain in the mouth for upto 4 weeks

• Composition :
• Base Paste : Zinc Oxide, Vegetable Oil.
• Catalyst Paste : Hydrogenated Resin, Ethoxy BenzoicAcid, OctanoicAcid, AceticAcid
• Working time : 2:00-2:30 minutes at a room temperature of 25°C.
• Self-curing time : 6-10 minutes at room temperature of 25°C.

• 1 x 15gm Cartridge (Base & Catalyst)
• 1 x Mixing Pad
• 1 x Cement Spatula
• 1 x Instruction Manual

• Manual-Mix, Extrude equal lengths of Base and catalyst onto the mixing pad provided.
• The length to be extruded will depend on the size and type of restoration to be cemented.
• Replace cap tightly on cartridge after use.
• Thoroughly mix the pastes for approximately 30-45 seconds.

Preparation and application

• Dry the prepared teeth and the surface of the restoration.
• Prior to cementation, a protective varnish (e.g., Shield Activ Desensitizer) may be applied to the clean and dry dentin surfaces. It should be brushed gently into the dentin for 10 seconds using a suitable instrument (brush, applicator brush).
• Carefully disperse excess to a thin layer with blown air/dry with an air syringe.
• Do not over dry the dentin (carefully follow the instructions supplied with Shield Activ Desensitizer).
• Apply a thin layer of the mixed cement to the internal surtaces of the temporary restoration.
• Subsequently, seat the provisional restoration with light pressure.
• Excess cement can be removed after 3 minutes using a scaler or other appropriate instruments.
• Also use a scaler and dental floss to remove any excess cement from the interproximal areas.
• The dispensed material shall not be placed back in container and the dose once applied and used shall not reused.

• Country of Origin: India
• Manufacturer: Prevest Denpro

• Warranty is not applicable for this product

Question: How is Prevest Oratemp Ne Manual-Mix mixed and applied?
Answer: OraTemp NE is easy to mix and apply. For best results, follow the manufacturer's instructions for mixing. Apply a thin layer of the cement to the interior of the restoration before seating it onto the tooth.

Question: What makes Prevest Oratemp Ne Manual-Mix suitable for temporary cementation?
Answer: OraTemp NE has excellent physical properties, including low solubility in oral fluids, which ensures a tight marginal seal to prevent leakage under restorations. It's strong enough to withstand mastication stresses yet allows for easy removal when desired.

Question: What is Prevest Oratemp Ne Manual-Mix, and what are its primary uses?
Answer: Prevest Oratemp Ne Manual-Mix is a non-eugenol temporary cement used for the placement and retention of permanent crowns, bridges, splints, and their temporary counterparts. It's designed for cementing temporary restorations and for trial cementation of permanent restorations prior to final insertion.