Prevest Fusion Ultra D/C- Intro Pack

• Dual curing-light and self curing (Initial set time 2 minutes, final set time 5 minutes)
• Low film thickness- Low solubility in oral fluids
• 2-stage polymerization allows fast and easy clean up without compromising working time
• Fully compatible with acrylic and bis-acrylic temporary materials

Composition:

Base Paste: Bisphenol A Glycidyl Methacrylate, Ethoxlated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agents and Stabilizer.

Catalyst Paste: Bisphenol A Glycidyl Methacrylate, Ethoxlated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agent and Stabilizer.

Technical Data 

1) Working Time: 60 sec.
2) Setting Time: 3-4 min.
3) Compressive Strength: 195 - 200 MPa.
4) Flexural Strength: 90 MPa.
5) Film Thickness: 25um

• 1 x Automix Syringe 9g
• 10 x Automix Tips.

Instructions for Use: Dispense the material from syringe through automix tip. The initial set will occur in 2:00 2:30( min:sec) with a final set at 3-4 minutes. The cement may also be cured with a dental curing light with a 40 second exposure.

1. Metal to Enamel/Dentin: Metal restorations to tooth structure-crowns, inlays, bridges, and posts including Maryland and bridges) After try-in, sandblast each side of the restoration. Using a metal primer of your choice, treat the metal exposed to the paste. Clean tooth with non-fluoridated prophy paste or pumice.
To prepare tooth for bonding, use a universal dentin / enamel bonding system. Mix equal Amounts of catalyst and base pastes and use a plastic instrument or injection system to place in restoration. Avoid trapping air bubbles. Seat Restoration on tooth and hold in place until paste reaches initial set (about 2:00- 2:30 minutes). Use a scaler or explorer to remove excess cement immediately upon initial set. It is not important to wait until the final set to remove excess cement.

2. Metal to Metal: Implant prosthesis or crown on post. Sandblast all external metal surfaces to be exposed to paste. Rough intra-oral metal with a micro-etcher or bur. Using a metal primer of your choice, treat the metal exposed to the paste. Clean posts or Abutments with non-fluoridated prophy paste or pumice. Mix equal amounts of catalyst and base pastes and use a plastic instrument or injection system to place in restoration. Avoid trapping air bubbles. Seat restoration on tooth and hold in place until paste reaches initial set (about 2:00–2:30 minutes). Use scaler or explorer to remove excess cement immediately upon initial set. It is not important to wait until final set to remove excess cement.

3. Ceramic Restorations to Teeth (Porcelain Veneers, In-lays, On-lays) After try-in, etch ceramic restoration and place in acetone or ethanol in ultrasonic cleaner for 1-2 minutes. Place silanating agent on internal or porcelain restoration. Clear tooth with non-fluoridated prophy paste or pumice. To prepare tooth for bonding, use a universal dentin / enamel bonding system. Mix equal amounts of catalyst and base pastes and use a plastic instrument or injection system to place in Restoration. Avoid trapping air bubbles. Seat restoration on tooth and hold in place until paste reaches initial set (about 2:00-2:30 minute) use scaler or
explorer to remove excess cement immediately upon initial set. It is not important to wait until final set to remove excess cement.

• Country of Origin: India
• Manufacturer: Prevest Denpro

Question: Can Prevest Fusion Ultra D/C be used for zirconia restorations?
Answer: Yes, Prevest Fusion Ultra D/C can be used for zirconia restorations. It requires proper surface preparation, cleaning, and the use of a zirconia primer before applying the dual-cure resin cement for strong adhesion and optimal bond strength.

Question: How do you place porcelain veneers using Prevest Fusion Ultra D/C?
Answer: To place porcelain veneers with Prevest Fusion Ultra D/C, first perform a try-in, then etch the ceramic restoration. Clean it in an ultrasonic cleaner with acetone or ethanol for 1-2 minutes. Apply a silanating agent to the internal surface of the veneer. Clean the tooth with non-fluoridated prophy paste or pumice, and prepare the tooth using a universal dentin/enamel bonding system. Mix equal amounts of catalyst and base pastes, applying the mixture carefully to avoid air bubbles. Seat the restoration and hold it until the paste reaches initial set (about 2:00-2:30 minutes). Remove excess cement with a scaler or explorer immediately after initial setting. Remember, dispensed material should not be reused.Read less

Question: What are the steps for ceramic restorations using Prevest Fusion Ultra D/C?
Answer: To perform ceramic restorations using Prevest Fusion Ultra D/C, start by preparing the ceramic restoration: after try-in, etch it and place it in an ultrasonic cleaner with acetone or ethanol for 1-2 minutes, then apply a silanating agent to the internal surface. Clean the tooth with a non-fluoridated prophy paste or pumice, and prepare it for bonding with a universal dentin/enamel bonding system. Mix equal parts of the catalyst and base pastes, then use a plastic instrument or injection system to apply the mixture in the restoration, ensuring no air bubbles are trapped. Seat the restoration on the tooth and hold it in place until it reaches an initial set (approximately 2:00-2:30 minutes). Immediately remove any excess cement with a scaler or explorer, without waiting for the final set.

Question: Is the Prevest Fusion Ultra D/C Intro Pack suitable for metal posts followed by core build-up?
Answer: Yes, the Prevest Fusion Ultra D/C Intro Pack is suitable for the permanent cementation of endodontic posts made of metal or reinforced composite. Its formulation provides strong adhesion and durability, making it an excellent choice for core build-up procedures in restorative dentistry.

Question: Can we use it for the cementation of crowns?
Answer: Yes, the Prevest Fusion Ultra D/C- Intro Pack is suitable for the permanent cementation of crowns. It provides reliable adhesion and durability for a variety of restorative applications, including crowns.

Question: Can we use it for cementation of zirconia crowns?
Answer: Yes, the Prevest Fusion Ultra D/C - Intro Pack can be used for cementation of zirconia crowns.

Question: Is this material Radio opaque?
Answer: Yes, Prevest Fusion Ultra D/C is radiopaque. This characteristic ensures that it is visible on dental X-rays, aiding in the identification and assessment of the restoration placement during and after dental procedures.

Question: Can this be used for emax laminate cementation?
Answer: Yes, the Prevest Fusion Ultra D/C- Intro Pack can indeed be used for e.max laminate cementation. This versatile dental cement is suitable for a wide range of restorative materials, including e.max, providing reliable adhesion and optimal esthetics for laminate restorations.

Question: Is there any bonding agent available with prevest denpro which will be compatible with fusion dual cure luting cement ?
Answer: Any universal dentin/enamel bonding agent, such as Prevest Denpro Fusion Bond 7, can be used with the Prevest Fusion Ultra D/C luting cement. This compatibility allows for effective bonding when using the Fusion Ultra D/C cement.Read less

Question: Can it be uses for zirconia crown too?
Answer: Prevest Fusion Ultra D/C is versatile and can be used for various restorations, including zirconia crowns, providing reliable and aesthetic results. It ensures excellent bond strength and long-lasting restorations.

Question: Is this useful for pfm and zirconia cementation ?
Answer: Yes, the Prevest Fusion Ultra D/C- Intro Pack is suitable for both PFM (Porcelain Fused to Metal) and zirconia cementation.

Question: Can this be used for emax veneer cementation?
Answer: The Prevest Fusion Ultra D/C Intro Pack is suitable for eMax veneer cementation. It offers reliable adhesion and durability, making it a compatible choice for securing eMax veneers in dental procedures, ensuring long-lasting results and patient satisfaction.

Question: Is it self cure also ?
Answer: Yes, the Prevest Fusion Ultra D/C Intro Pack includes a self-cure feature, providing flexibility in dental applications where light curing may not be required. This allows for reliable and versatile use in various dental procedures.

Question: Do we need a primer for bonding?
Answer: Prevest Fusion Ultra D/C is indicated for permanent cementation in various dental procedures. For metal to enamel/dentin, sandblast, apply metal primer, use bonding system, and remove excess cement upon initial set. For metal to metal, sandblast, apply metal primer, and follow similar steps. For ceramic restorations, etch, use a silanating agent, bonding system, and remove excess cement.

Question: Can we use for fiber post luting ?
Answer: Prevest Fusion Ultra D/C is indeed suitable for luting fiber posts. This dental luting material is versatile and can be used for various bonding purposes, including effectively securing fiber posts in dental procedures.

Question: Can automix tips be used more than one time ?
Answer: The automix tips provided in the packaging of Prevest Fusion Ultra are meant to be used only once and should be discarded after use.

Question: Is it suitable for zirconia crown luting
Answer: Yes, the Prevest Fusion Ultra D/C Intro Pack is suitable for zirconia crown luting. It offers excellent adhesive properties and durability, making it an ideal choice for bonding zirconia crowns effectively.