Prevest Denpro
Prevest Denpro Fusion Self Comp Kit
Prevest Denpro Fusion Self Comp Kit
Couldn't load pickup availability
Fusion Self Comp is a self-cured micro fine hybrid composite with high filler loading (filler content > 80%) which imparts high compressive strength to the material. The micro fine hybrid structure offers high abrasive resistance and superior resistance to micro fine masticatory impact. The robust structure offers exemplary mechanical properties with minimal shrinkage.
Self-Comp is a polymer based chemical curing composite with 80% w/w filler content. Self-Comp comes in universal shade (A2) which is suitable for most patients.
Indications:
- As direct filling material in small class-I cavities with high C-factor
- As a base increment in deep cavities utilizing direct polymerization technique
- As a core build up material
- Pre and post endodontic restorations
Contraindications:
- Use in patients with a known allergy to methacrylate resins or any other of the components.
- Direct or indirect pulp capping.
- When contamination with saliva, blood etc cannot be avoided.
Features
Features
- High compressive and tensile strengths
- High polishability
- Superior abrasive resistance
- High degree of conversion
- Superior marginal adaptability
Description
Description
Specification
Specification
Composition:
Base Paste:
Urethane Dimethacrylate, Ethoxylated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Bisphenol ADiglycidyl Methacrylate, Barium Glass Powder, Fillers, Curing Agent, Stabilizer.
Catalyst Paste:
Urethane Dimethacrylate, Ethoxylated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Bisphenol ADiglycidyl Methacrylate, Barium Glass Powder, Fillers, Curing Agent, Stabilizer, Pigments.
Packaging
Packaging
- 1 x 14g Base Paste in Jar
- 1 x 14g Catalyst Paste in Jar
- 1 x Mixing Spatula
- 1 x Mixing Pad
- 1 x Instruction Manual
Direction to use
Direction to use
- Clean the teeth to be treated with a fluoride-free cleaning paste. Using a minimally
invasive technique/adhesive filling technique is recommended to preserve healthy tooth substance. - Cleaning and drying the cavity has to be carried out with special preparations (e.g., hydrogen peroxide solution).
- Observe instructions for use when applying the bonding materials. Apply pulp protection when working in close proximity to the pulp.
- Lining deep cavities with a glass ionomer cement is recommended due to its release of fluoride. Bevel enamel margins and etch for 20 - 30 sec (Actino).
- Then thoroughly rinse and dry. Do not etch dentine for more than 15 sec when using the “total-etch-technique”.
- Use a suitable dental adhesive according to the instructions for use. Mix equal quantities of Self Comp base and catalyst paste on the mixing pad with a spatula for approx. 15 - 30 sec until homogeneous.
- Do not use the same end for base and catalyst paste as, dispensing of base/catalyst from their respective jars with same end of mixing spatula might lead to premature setting.
- Dry the cavity before application. The working time of Self Comp is approx. 2 min and the setting time is 3-4 min. Do not move strips or matrix during this time.
- Remove any large areas of excess material with diamond bur. Using discs of graduated grains or a finishing diamond (lingual, palatinal area) is recommended for finishing.
- Diamond metal strips are suited for the approximal area.
- Then polish with a suitable polishing paste. A fluoride varnish should be applied to all treated teeth to support re-mineralization.
- The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused.
Additional info
Additional info
- Country of Origin: India
- Manufacturer: Prevest Denpro
Warranty
Warranty
Product Related Questions
Product Related Questions
Share
