NSK S-max M65 Internal Spray Straight Handpiece

• Internal spray system for efficient and precise cooling.
• M65 Ceramic Bearings for enhanced durability and reduced weight.
• Straight design for excellent maneuverability and access.
• Stainless steel body for durability and corrosion resistance.
• Compatible with various dental units and systems.
• Bur stopper included for precise and controlled cutting.
• Ergonomic grip for comfortable and secure handling.
• High-speed performance with a maximum speed of 40,000 min-1.

• Gear Ratio: 1:1 Direct Drive 
• Max Speed: 40,000 min-1
• For: For HP Burs (Ø2.35) / For CA Burs (Ø2.35)*
• Water Spray: Single Spray
• Body Material: Stainless Steel
• Handpiece Connection Type: ISO 3964 Type 2

• 1 X Straight Handpiece

• Connect the handpiece to the dental unit or air turbine using the appropriate coupling or connection type. Ensure a secure and stable connection.
• If necessary, insert the supplied bur stopper into the handpiece to limit the bur's insertion depth and ensure precise and controlled cutting.
• Prior to starting the procedure, check the water supply and ensure that the water spray is functioning properly. Adjust the water flow and spray as needed for optimal cooling.
• Hold the handpiece in a comfortable and secure grip, ensuring a firm but relaxed grasp. Position your hand and fingers for optimal control and maneuverability.
• Before activating the handpiece, inform the patient about the upcoming procedure and ensure they are comfortable and prepared.
• Start the handpiece by activating the foot pedal or control mechanism on the dental unit, following your standard operating procedures.
• As you work, maintain a steady and controlled hand movement. The straight design of the handpiece allows for precise access to the treatment area.
• Monitor the cooling effect of the internal spray system throughout the procedure. Ensure that the bur and surrounding area are adequately cooled to prevent discomfort and overheating.
• Follow the recommended speed and pressure guidelines for the specific procedure and type of bur being used.
• Adjust the speed and pressure as needed for optimal results.
• Periodically check the handpiece for any signs of overheating, unusual noises, or decreased performance. If any issues arise, stop the procedure and inspect the handpiece for potential problems.
• After completing the procedure, deactivate the handpiece and release the foot pedal or control mechanism.
• Ensure that the handpiece is completely stopped before removing it from the treatment area.
• Disconnect the handpiece from the dental unit or air turbine, following the appropriate disconnection procedure for your specific setup.

• Country Of Origin: JAPAN
• Manufacturer: NSK

• Manufacturer/Importer warranty of 6 Months as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product.
• Oralkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer.
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only.
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

Question: Is it Compatible with NSK Surgic Pro?Answer: Yes, the NSK S-max M65 Internal Spray Straight Handpiece is compatible with the NSK Surgic Pro.

Question: What is the purpose of the internal spray system?
Answer: The internal spray system provides efficient and precise cooling to prevent overheating during dental procedures, ensuring patient comfort and optimal performance.

Question: Are the M65 Ceramic Bearings included with the handpiece?
Answer: Yes, the NSK S-max M65 handpiece comes equipped with M65 Ceramic Bearings, which offer enhanced durability, reduced weight, and exceptional wear resistance.

Question: Can I use this handpiece with different types of burs?
Answer: Yes, the handpiece is designed to accommodate HP burs and CA burs with a diameter of 2.35mm. A supplied bur stopper can be inserted to control the insertion depth.

Question: What type of connection does the handpiece have?
Answer: The handpiece connection type follows the ISO 3964 Type 2 standard, ensuring compatibility with various dental units and systems.

Question: What are the key features of the NSK S-max M65 handpiece?
Answer: Key features include an internal spray system for cooling, M65 Ceramic Bearings for durability, a straight design for maneuverability, stainless steel body, Clean Head System, and compatibility with ISO 3964 Type 2 connection.