Kids-e-Restore Self Adhesive Flowable GIC

• Self-Adhesive Technology: Eliminates the need for separate etching and bonding procedures, streamlining the restorative process.Self-etching properties with chemical adhesion ensure a strong bond to the tooth structure.
• Sustained Fluoride Release: Promotes antimicrobial and anticaries activity, enhancing the long-term health of the restored teeth.
• Eliminates Etching and Bonding Procedures: Simplifies the restorative process by eliminating the need for separate etching and bonding steps, saving time and reducing complexity.
• Highly Thixotropic: Stays neatly in place and holds its shape, preventing slumping or spreading during application.
• Promotes Antimicrobial and Anticaries Activity: Sustained fluoride release helps prevent caries and provides ongoing antimicrobial protection, enhancing oral health.
• Smooth and Esthetic Finish: Provides a smooth, polished surface that blends seamlessly with natural tooth structure, ensuring a pleasing esthetic result.
• Physical Performance Similar to Regular GIC Material: Demonstrates durability and resistance to wear, comparable to traditional glass ionomer cement materials.
• Carefully Balanced Viscosity: Ensures easy and convenient placement, allowing the material to flow into small crevices and irregularities for complete coverage.
• Self-Etching Properties: Enhances adhesion to tooth structures, eliminating the need for separate etching steps and simplifying the procedure.
• High Radiopacity: Easily distinguishable on X-rays, aiding in post-procedure diagnosis and monitoring. Helps in the detection of secondary caries and other potential issues.
• Low Shrinkage: Minimizes the risk of gaps and marginal leakage, enhancing the longevity of the restoration. Reduces stress on the tooth structure during the curing process.

• Composition: Resin-reinforced glass ionomer, Contains fluoride for sustained release
• Curing Method: Light Cure
• Viscosity: Flowable consistency and Highly thixotropic
• Adhesion: Self-adhesive with self-etching properties
• Setting Time: Initial light cure: 20-40 seconds (depending on layer thickness)
• Compressive Strength: Comparable to conventional GIC
• Flexural Strength: Enhanced due to resin reinforcement
• Wear Resistance: High, suitable for both primary and permanent teeth
• Storage: Store in a cool, dry place and Avoid direct sunlight and extreme temperatures

• 1 x 2gm Syringe
• 8 x Tips

• Preparation: Ensure the treatment area is clean and dry. Isolate the tooth to be treated to prevent contamination from saliva or blood.
• Application: Dispense the required amount of Kids-e-Restore directly from the syringe onto the prepared tooth surface.Use a dental instrument to manipulate the material, ensuring it flows into all crevices and irregularities. The material’s flowable and thixotropic properties should make this step straightforward.
• Placement: Gently shape and contour the material as needed to fit the tooth anatomy. Make sure the material is evenly distributed and covers the entire prepared area without any air bubbles or voids.
• Light Curing: Use a dental curing light to harden the material. Curing time, typically around 20-40 seconds, depending on the thickness of the material.Ensure that the curing light covers all areas of the restoration to achieve a complete set.
• Finishing and Polishing: Once the material is fully cured, use finishing burs and polishing tools to refine the shape and smooth the surface of the restoration. Ensure the restored area blends seamlessly with the natural tooth structure for an esthetic finish.
• Final Checks: Check the occlusion to make sure the restored tooth does not interfere with the patient’s bite. Adjust if necessary to ensure patient comfort and functionality.
• Post-Procedure Care: Provide the patient with post-treatment instructions, including any necessary dietary restrictions or care tips to ensure the longevity of the restoration. Schedule a follow-up appointment to monitor the success of the restoration and address any potential issues.

• Country of Origin: India
• Manufacturer: kids-e-dental LLP

Question: Is etching of the cavity required when using Kids-e-Restore Self Adhesive Flowable GIC?
Answer: No, etching of the cavity is not required when using Kids-e-Restore Self Adhesive Flowable GIC. Instead, ensure the treatment area is clean and dry, and isolate the tooth to prevent contamination. Apply the material directly from the syringe, allowing it to flow into all crevices, and follow the light curing and finishing steps for optimal results. This product is designed for ease of use, providing effective adhesion without the need for additional etching.

Question: Do we need to light cure it?
Answer: Yes, you need to light cure Kids-e-Restore Self Adhesive Flowable GIC. Although it is self-adhesive, eliminating the need for separate bonding agents, curing with a dental curing light is necessary to harden the material. The curing time typically ranges from 20 to 40 seconds, depending on the thickness of the applied material.

Question: What is Kids-e-Restore?
Answer: Kids-e-Restore is an injectable dental material that combines the strength of glass ionomer with the convenience of a flowable composite resin.

Question: What makes Kids-e-Restore unique?Answer: It is self-adhesive, eliminating the need for separate bonding agents, and it is injectable, allowing for easy placement and shaping.

Question: What restorative applications is Kids-e-Restore suitable for?
Answer: Kids-e-Restore is suitable for a wide range of dental restorations, including fillings, small repairs, and aesthetic enhancements.

Question: Is Kids-e-Restore suitable for pediatric patients?
Answer: Yes, Kids-e-Restore is designed for use in pediatric dentistry, offering efficient and durable restorations for young patients.