Kalabhai Ultra Rock Die (Brown) Stone (3kg)

• Homogenous material provides a smooth, even application on die stone and plaster.
• Abrasion Resistant property protects models against wear and tear, especially at marginal areas.
• Film remains intact during wax pattern building, even under heat.
• Quick setting time reduces overall working time.
• Long-lasting performance, ensuring models stay intact over extended use.
• Viscosity of material ensures easy mixing and application without air bubbles.
• Brown color offers a polished, professional look to finished models.

• Color: Brown
• Type: Class IV
• Water/Powder Ratio: 20 ml / 100 g
• Soaking Time: 30 seconds
• Mixing Time (Mechanical): 30 seconds
• Mixing Time (Manual): 45 seconds
• Setting Time: 6 - 8 minutes
• Hardening Time: 30 minutes
• Setting Expansion: 0.08% Max
• Compressive Strength
  After 1 hr: 550 kg /cm2
  After 24 hr: 900 kg /cm2
• Weight: 3 kg

• 1 x 3 Kg Ultra Rock Die (Brown) Stone

Preparation:

• Ensure all mixing tools and surfaces are clean and dry before starting.
• Measure the required amount of water and die stone powder. The recommended water-to-powder ratio is essential for optimal results.

Mixing:

• Pour the measured water into a clean mixing bowl.
• Gradually add the Kalabhai Ultra Rock Die Stone powder to the water.
• Mix thoroughly for 30-60 seconds using a mechanical mixer or manually until a smooth, homogenous mixture is achieved. Avoid air bubbles.

Pouring:

• Carefully pour the mixed die stone into the mold or impression.
• Use gentle vibration to eliminate any trapped air bubbles and ensure complete coverage.

Setting:

• Allow the die stone to set. Initial setting time is rapid, typically within a few minutes.
• Wait for at least 30 minutes to ensure full hardness before removing the model from the mold.

Finishing:

• Trim and finish the model as required.
• The model is now ready for further processing, such as wax pattern building. The coating remains stable and does not disassociate under heat.

Storage:

• Store the unused Kalabhai Ultra Rock Die Stone powder in a dry, cool place.
• Keep the container tightly sealed to prevent moisture absorption.

Safety Precautions:

• Wear protective gloves and a mask to avoid inhaling dust.
• Work in a well-ventilated area.
• Avoid contact with eyes and prolonged skin exposure.

• Warranty is not applicable for this product.

Question: How should Kalabhai Ultra Rock Die Stone be mixed and applied?
Answer: Use a clean mixing bowl and spatula to achieve a smooth and homogenous mixture. Rapidly mix for 30 seconds in case of manual mixing while 45 seconds for mechanical mixing.

Question: What is Kalabhai Ultra Rock Die Stone used for?
Answer: Kalabhai Ultra Rock Die Stone is used in dental laboratories for making durable and precise models, including fixed prostheses, stump models, and master models.

Question: How does Kalabhai Ultra Rock Die Stone protect models against abrasion?
Answer: It forms a stable coating that specifically protects the marginal areas of models, which are prone to breakage and abrasion.

Question: Can Kalabhai Ultra Rock Die Stone withstand heat during wax pattern building?
Answer: Yes, the die stone maintains its integrity and does not dissociate from the die when heated during wax pattern construction.