Ivoclar Vivadent Multilink N Refills

• Versatile adhesive for various dental restorations
• Strong and long-lasting bond
• Coordinated system with self-etch adhesive
• Easy excess cement removal
• Universal application for different materials
• Recommended storage at 2-8°C

Composition:

• Monomer Matrix: Includes methacrylate and HEMA (Hydroxyethyl methacrylate).
• Inorganic Fillers: Contain barium glass, ytterbium trifluoride, and spheroid mixed oxide with a total volume of approximately 40%.
• Particle Size: Ranging from 0.25 to 3.0 µm, with a mean particle size of 0.9 µm.

Storage Temperature:

• Recommended storage temperature is 2-8°C (36-46°F) to maintain stability and shelf life.

• 1 x 6g Multilink N Refills
• 10 x Mixing Tips Short Tapered

Removal of Temporary Restoration and Cleaning:

• Remove temporary luting cement from the cavity.
• Clean the cavity with a polishing brush and an oil and fluoride-free cleaning paste.
• Rinse with water spray and dry with oil-free air. Avoid over-drying.
• Do not use alcohol for cleaning, as it may dehydrate dentin.

Try-in of the Restoration and Drying:

• Check the shade, fit, and occlusion of the restoration.
• Make necessary adjustments with fine diamonds if needed, using water for cooling.
• Use rubber dams or alternative isolation methods to prevent contamination.
• If contamination occurs, clean the dental hard tissue again.

Pre-treatment of the Restoration:

• Rinse the restoration and dry it with oil-free air.
• Coat the bonding surface with Ivoclean and allow it to react.
• Rinse the restoration and dry it with oil-free air.
• Apply Monobond N if necessary, following the specific guidelines for the restoration type.

Mixing of Multilink N Primer A and B:

• Mix Multilink N Primer A and B in a 1:1 ratio (within a 10-minute window).

Application of the mixed Multilink N Primer A/B:

• Apply the mixed primer onto the entire bonding surface.
• Start with the enamel surface and scrub it in.
• Disperse excess with blown air; no light-curing is necessary.

Application of Multilink N to the Restoration:

• Dispense Multilink N onto the restoration.
• Apply it directly to the inner surface of the restoration.

Placement of the Restoration and Removal of Excess Cement:

• Seat the restoration and secure it in place.
• Remove excess material immediately with suitable tools.
• Follow the specific technique instructions for self-curing, self-curing with additional light-curing, or other methods.

Finishing of the Restoration:

• Finish the cement joints if necessary.
• Polish restoration margins and cement joints with suitable polishers.
• Check occlusion and function and make adjustments as needed.

• Warranty is not applicable for this product.

Question: Can it be used for composite restoration?
Answer: Yes, Ivoclar Vivadent Multilink N Refills can be used for composite restoration. Its universal application makes it suitable for a wide range of restorative materials, including metal, metal-ceramic, all-ceramic, and composite resin restorations.

Question: How is excess cement removed after placing the restoration?
Answer: Excess cement can be removed using suitable tools, and the method may vary based on the specific technique chosen (self-curing, self-curing with additional light-curing). Proper cleanup is essential for achieving a well-fitted restoration.

Question: Can Multilink N be used with different types of dental materials?
Answer: Yes, Multilink N is designed for universal application and can be used with various materials commonly used in restorative dentistry, including metal, ceramics, and composite resins.

Question: What is the role of Multilink N Primer in the system?
Answer: Multilink N Primer is a self-etch adhesive used to seal dentin, ensuring marginal integrity and high bond strength on enamel and dentin. It provides the basis for a strong and lasting bond between the restoration and tooth structure.