GC Fujicem Luting Glass Ionomer

• Cartridge delivery always dispenses the correct ratios
• Minimizes cement waste
• Flexibility in the amount of cement that can be dispensed
• Easier mixing in only 10 secs.
• No air bubbles
• Sufficient working time
• Minimal film-thickness of only 3 µ.
• Guaranteed adhesive strength
• Effective fluoride release
• Optimal clinical performance

COMPOSITION

Note: Refrigeration of cartridges extends the working time by 30 sec

CONTRAINDICATIONS

1. Pulp capping.

2. In rare cases the product may cause sensitivity in some people. If any such reactions are experienced, discontinue the use of the product and refer to a physician.

STORAGE

Store in a cool and dark place (4-25°C)(39.2-77.0°F). If not in use for a prolonged period of time, store in refrigerator.

Shelf life: 2 years from the date of manufacture

Gc Fujicem Refill Pack 13.3g Cartridge:

• 1 Cartridge of 13.3 gm / 7.2 ml
• Instruction Manual
• 1 x Mixing Pad

Gc Fujicem Luting Glass Ionomer - Dispenser:

• 1 x Dispenser only

1. Paste Pak Cartridge Loading

a. Make sure that the piston is completely retracted into the dispenser.

Note : To retract the piston, hold both the slide block and release lever (on the underside of the dispenser) with fingers and pull them back together. 

b. Load the cartridge into the Paste Pak Dispenser. 1) Ensure the mark on the cartridge lines up with the mark on the Paste Pak Dispenser as illustrated. 2) Then turn the cartridge fully to the right position. Note : To remove the cartridge, retract the piston fully and turn the cartridge back to the marked positions.

c. After cartridge loading, slide the release lever forward until it stops. a) Push the front of the release lever. b) Do not push the upper side.

2. Dispensing

a. Remove the cartridge cover.  b. Depress the lever to dispense the required amounts of paste onto the mixing pad.

Note : 1) Before dispensing the first material from a new cartridge or when dispensing after a long interval, bleed the pastes in order to prevent the incorporation of air bubbles into the material. 2) The finger grip can be moved forwards or backwards to change the quantity of material to be dispensed. 

c. While depressing the lever, level and cut off the extruded material from the tips of the cartridge by moving the cartridge and dispenser to an upright position on the mixing pad. 1. Level and cut off material. 2. Depressing the lever. When the lever is released after dispensing, residual pastes at the tips are retracted into the cartridge. Replace the cartridge cover. Note : 1) If any surplus paste is retained on the cartridge tips after dispensing, remove with gauze, etc. 2) The amount of residual material in the cartridge can be confirmed by the position of the slide block on the underside of the dispenser. As the cartridge has translucent tips, the residual amount can also be confirmed by the position of the inner plunger seen through the tips. 3) Do not drop the dispenser with the cartridge. Otherwise the cartridge may be damaged.

3. Mixing

After dispensing, incorporate and spread the material out in a thin layer on the mixing pad using a plastic spatula. Mix thoroughly, with lapping strokes, for 10 seconds. Be careful not to incorporate air bubbles. Note : 1) The two pastes are similar in color, so mix with care. When a large amount is required for 2 - 4 crowns, mix for 15 seconds. 2) The working time is 3 minutes from the start of mixing at 23°C (73.4°F). Higher temperatures will shorten working time. 3) Do not mix GC FujiCEM pastes with other materials.

• Country Of Origin: Japan
• Manufacturer: GC

• Warranty is not applicable for this product.

Question: Can it be used for cementing Zirconia crowns ?
Answer: GC Fujicem Luting Glass Ionomer is a well-regarded dental cement with proven efficacy. It is traditionally not recommended for bonding Zirconia crowns due to the material's unique characteristics. Zirconia demands a specialized bonding agent, typically resin cements tailored for high-strength ceramics.

Question: Can I extend the working time of GC FujiCEM?
Answer: Yes, refrigerating the cartridges can extend the working time by an additional 30 seconds, which can be helpful in certain cases.

Question: What is the setting time for GC FujiCEM?Answer: The setting time for GC FujiCEM is approximately 4 minutes and 30 seconds. This ensures that the cement has ample time to set properly.

Question: How long is the working time for GC FujiCEM?
Answer: The working time for GC FujiCEM is approximately 3 minutes, allowing dentists ample time for application and adjustment before it sets.

Question: What types of dental restorations can GC FujiCEM be used for?
Answer: This luting cement is suitable for cementing all types of metal, porcelain fused to metal, and resin crowns, inlays, onlays, and bridges. It can also be used for cementing porcelain inlays and as a base or liner.

Question: How is GC FujiCEM dispensed and mixed?
Answer: GC FujiCEM is dispensed using the Paste Pak System, which ensures the correct ratios of the two pastes (Paste A and Paste B). The two pastes are mixed in just 10 seconds, resulting in a homogenous and consistent mixture.

Question: What are the advantages of using GC FujiCEM?
Answer: Some advantages of GC FujiCEM include precise cartridge delivery, minimal cement waste, flexibility in dispensing, quick mixing in 10 seconds, absence of air bubbles, sufficient working time, low film thickness, guaranteed adhesive strength, effective fluoride release, and optimal clinical performance.

Question: What is GC FujiCEM Luting Glass Ionomer cement?
Answer: GC FujiCEM is a glass ionomer luting cement used for cementing various dental restorations, including crowns, inlays, onlays, bridges, and porcelain inlays. It is known for its excellent performance and ease of use.

Question: What are the key features of GC Fujicem Luting Glass Ionomer?
Answer: GC Fujicem Luting offers several key features that make it a valuable addition to dental practices. It provides high bond strength, ensuring the stability of luted restorations. This cement also exhibits excellent biocompatibility and low solubility, contributing to the longevity of the luting procedure. Its ease of use and reliable performance make it a trusted choice for various dental applications.

Question: How is GC Fujicem Luting Glass Ionomer used in dental procedures?
Answer: GC Fujicem Luting is mixed to achieve the desired consistency. It is suitable for a wide range of luting applications, including crowns, bridges, and inlays. Its excellent handling properties make it a preferred choice for many dental professionals.

Question: What is GC Fujicem Luting Glass Ionomer?
Answer: GC Fujicem Luting is a resin modified glass ionomer cement. It is widely used in dental practices for its exceptional strength and reliable adhesion. This product is specially formulated for luting procedures, providing secure bonds for various dental restorations.