ET Dental Dispensing Gun

• Easy mixing and dispensing of the impression material
• Excellent quality uniform smooth mix
• Suitable for all cartridges.
• Automatic mixing and delivery of impression materials made easy with this handgun dispenser.

Ratio :

• 1:4 - The impression gun is used to discharge the crown & bridge materials from cartridges.
• 1:1/2:1 - The impression gun is used to discharge the impression materials and bite registration materials from cartridges.
• Ergonomic Design
• Durable Construction
• Easy to Clean
• Lightweight

• 1 x ET Dental Dispensing Gun

• Lift the release lever of the dispenser and pull the piston plunger all the way back into the dispenser.
• Lift the cartridge holder of the dispenser and load the cartridge ensuring that the V-shaped notch on the flange of the cartridge is facing down. Push down the cartridge holder to fix the cartridge.
• Lift the release lever and push the piston plunger forward until it engages into the cartridge.
• Remove the cartridge cap by rotating 1/4 turn anti-clockwise, tilt the cap downward and peel it away from the cartridge. Gently squeeze the dispenser handle to extrude a small amount of material from the two openings at the end of the cartridge. Make sure that base and catalyst come out evenly.
• Align the V-shaped notch on the rim of MIXING TIP II to the V-shaped notch between the cartridge barrels. Push firmly to attach the mixing tip. Then, rotate the colored collar of the mixing tip 1/4 turn clockwise to the end of the cartridge. The dispenser is now ready for use.
• Squeeze the handle several times to extrude the material. After use, do not remove the MIXING TIP II as this will become the storage cap until the next use. When replacing the MIXING TIP II, rotate the collar on the mixing tip 1/4 turn anti-clockwise to align the V-shaped notch on the cartridge. Tilt the mixing tip downward and peel it away from the cartridge.
• Remove and replace the old mixing tip immediately prior to the next use. Before attaching a new tip, gently extrude a small amount of material to ensure that base and catalyst are flowing evenly from both openings. If the materials fail to extrude, remove any hardened materials on the end of the cartridge.
• To replace the cartridge, lift the release lever and retract the plunger fully. Remove the empty cartridge by lifting the cartridge holder and loading a new one into the dispenser.

• Country of Origin: Made in PRC

• Manufacturer/Importer has No Warranty as applicable for this product.
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or has not tampered as the case may be.

Question: Is it compatible with Waldent A-silicone light body kit ?
Answer: Yes, the ET Dental Dispensing Gun is compatible with the Waldent A-silicone light body kit. This ensures efficient and precise dispensing of the silicone material during dental procedures.

Question: How can multiple ratio can work at the same time in one product?
Answer: The ET Dental Dispensing Gun is designed to accommodate multiple ratios through the use of different variants. For instance, the 1:1/2:1 variant is engineered to work with both 1:1 and 2:1 type of cartridges, allowing users to apply equal parts or twice as much part A versus part B in a single application. On the other hand, the 1:4 variant is compatible with 1:4 and 1:10 type of cartridges, enabling users to mix epoxies or adhesives with varying ratios based on the specific requirements of the task. This design provides users with the flexibility to handle different ratio applications using a single dispensing gun.

Question: Will 4:1 work for 3m protemp 4 ?
Answer: Yes, ET Dental 4:1 dispensing gun is compatible with 3M Protemp 4 Temporization Material.

Question: Will this suit for neoendo additional silicone light body kit?
Answer: Yes, the ET Dental Dispensing Gun 1:1 is suitable for the Neoendo Additional Silicone Light Body Kit.

Question: Which type of material syringes fit into this gun , or any company syringes fit ? square neck or round neck ?
Answer: The ET Dental Dispensing Gun has specific compatibility based on the type of materials and cartridges. The ET Dental 1:1 dispensing gun is designed to work with Light body impression materials and bite registration materials cartridges that have a round neck. On the other hand, the ET Dental 1:4 dispensing gun is compatible with Temporary crown and bridge materials cartridges with a round neck. It's important to match the type of dispensing gun with the appropriate cartridges for effective and accurate dispensing.

Question: What is the volume of material it can accommodate?
Answer: The ET Dental Dispensing Gun is specifically designed for use with 50ml cartridges. Its design ensures efficient and precise dispensing of materials, making it suitable for various applications in a controlled manner.

Question: What is the advantage of using this dispensing gun ?
Answer: It offers direct delivery of material while eliminating the need for mixing pads and messy cleanup.

Question: What is the difference between 1:1 & 4:1 Dispensing Gun ?
Answer: 4:1 Impression gun is used to discharge the crown & bridge materials from cartridges. While 1:1 Impression gun is used to discharge the impression materials and bite registration materials from cartridges.