Dentsply WaveOne Gold Rotary Files Refill

• Increases patient safety, while reducing shaping time across a wide range of cases.
• Optimized with enhanced design features by leading endodontists.
• Part of a complete solution that includes obturation products designed to match the shapes created by WaveOne® Gold files.
• The WaveOne® Gold family now includes a single glide path file with reciprocating motion for simplicity from the start.
• The WaveOne® Gold Glider is only for use in reciprocating motion with compatible Dentsply Sirona motors. Helpful pre-programmed motor settings are available.

Reinforces patient safety

• Primary WaveOne® Gold file is 50% more resistant to cyclic fatigue than WaveOne® Primary file.
• Reduced screwing effect** compared to standard rotary systems.

Covers a wider* range of canal morphologies

• Enhanced file flexibility thanks to the Gold technology.
• Extended size range (Small, Primary, Medium, Large).

Shortens the shaping time

• Takes the cutting efficiency to a higher level.
• A single file per treatment also translates into time savings for canal shaping and irrigation.

Specifications : 

Taper :

• Small - 20/07
• Primary - 25/07
• Medium - 35/06
• Large -45/05
• Length - 21mm, 25mm, 31mm

• Pack of 3 Files

• Review radiographs to determine the width, length, and curvature of the root canal.
• Access preparation:
• Create straight-line access to the canal orifice(s) and ensure proper shaping of the internal axial walls.
• After removing any WaveOne Gold Glider file or WaveOne® Gold shaping file from a canal, irrigate abundantly and frequently.
• If a file does not easily progress, remove it, clean and inspect the cutting flutes, irrigate, recapitulate with a size 010 file, and re-irrigate.
• Use a gentle inward pecking motion with short amplitude strokes to advance the files along a smooth glide path.
• Prepare straight-line access to the canal orifice.
• Use a size 010 hand file with a lubricant to explore the canal.
• Determine working length using a preoperative radiograph and/or apex locator.
• Irrigate the canal.
• Passively advance the WaveOne® Gold Glider file with gentle inward pressure until the full working length is reached.
• Irrigate the expanded glide path, recapitulate, and irrigate again.
• Confirm the working length before proceeding to shaping with the WaveOne® Gold shaping system.
  Establish straight-line coronal and radicular access.
• Use a size 010 hand file to verify a glide path to length.
• Expand the glide path to at least 0.15 mm using a manual or mechanical glide path file.
• Always start the shaping procedure with the PRIMARY WaveOne® Gold file (025/07 red) in the presence of sodium hypochlorite.
• Let the PRIMARY file passively progress through the canal, remove and clean it after shaping 2-3 mm, then irrigate and recapitulate with a size 010 hand file.
• Continue using the PRIMARY file to pre-enlarge the coronal two-thirds of the canal with gentle inward pressure and a brushing motion on the outstroke.
• In more restrictive canals, use a size 010 hand file to negotiate to the terminus and work it until it is loose at length.
• Establish working length, confirm patency, and verify the glide path.
• Expand the glide path to at least 0.15 mm using a manual or mechanical glide path file.
• Use the PRIMARY file to the full working length in one or more passes, remove it to avoid over-enlarging the foramen, and inspect the apical flutes.
• If the PRIMARY file does not progress, use the SMALL file (020/07 yellow) in one or more passes to working length, and then use the PRIMARY file to optimize the shape.
• Once the shape is confirmed, proceed with 3-D disinfection protocols.

• Country Of Origin: Switzerland
  
• Manufacturer: Dentsply

Question: What is WaveOne Gold?
Answer: WaveOne Gold is the latest generation of reciprocating technology developed by Dentsply Sirona Endodontics. It is a single-file system used for root canal preparation.

Question: How is WaveOne Gold different from the previous generation?
Answer: WaveOne Gold maintains the simplicity and philosophy of the original WaveOne system but offers additional benefits and enhancements. It provides a single file (Primary size) for the majority of canals, uses the same reciprocating motion, and has a variable taper and evolving cross-section.

Question: Can WaveOne Gold be sterilized and reused?
Answer: No, WaveOne Gold is intended for single use only, and sterilization and reuse are not recommended. Reusing the files can lead to decreased efficiency and increase the risk of cross-contamination and file separation.

Question: Is WaveOne Gold a single-use instrument?
Answer: Yes, WaveOne Gold follows a single patient use policy, meaning it is intended for single use only. Reusing the instrument can compromise its efficiency and increase the risk of file separation.

Question: Are there dedicated obturation products for WaveOne Gold?
Answer: Yes, WaveOne Gold is complemented by a complete solution of obturation products. This includes variable tapered gutta-percha points specially designed to fit canals prepared with WaveOne Gold files, ensuring an optimal seal during root canal filling.

Question: Is WaveOne Gold compatible with other endodontic systems?
Answer: WaveOne Gold has its own reciprocating motion settings (Compatibility XS+/iQ WaveOne settings), specifically designed for optimal performance. It is recommended to use the approved settings and accompanying products for the best results.

Question: What are the advantages of using WaveOne Gold?
Answer: Some advantages of WaveOne Gold include its gold treatment, which enhances durability and flexibility. It utilizes a reciprocating motion, which is gentle on the tooth structure and reduces the risk of file separation. The variable taper design allows efficient cleaning and shaping of root canals, and the optimized tip enhances cutting efficiency.