Dentsply Aquasil Soft Putty And Kit

• Very high viscosity: Aquasil Soft Putty exhibits a very high viscosity, ensuring excellent flow and stability during impression taking.
• Optimum flexibility: The putty offers optimum flexibility, allowing for easy removal from undercuts without distortion or tearing.
• Precision impressions: Aquasil Soft Putty enables the capture of precise impressions, ensuring accurate reproduction of oral structures and details.
• Dimensional accuracy: The putty maintains dimensional accuracy, providing reliable and consistent results for prosthetic work.
• Versatile application: It can be used as a tray material for the double mix technique, facilitating accurate and efficient impressions.
• Two-step putty/wash technique: Aquasil Soft Putty is suitable for use as a primary impression material in the two-step putty/wash technique, providing versatility in impression procedures.
• Hydrophilic properties: The putty is hydrophilic, meaning it has excellent wetting and flow characteristics, resulting in improved adaptation and detailed impressions.

Soft Putty :

• 1 x 450 ml Catalyst
• 1 x 450 ml Base. 2 Spoons

Soft Putty With Reprosil Tube Light Body:

• 1 x 450 ml Catalyst
• 1 x 450 ml Base. 2 Spoons
• 180ml tube package (Base - 90ml and Catalyst - 90ml)

Dentsply Aquasil Soft Putty With Lv Tube Monophase:

• 180ml tube package (Base - 90ml and Catalyst - 90ml)

Dentsply Aquasil Soft Putty Regular Set 2x450ml + Aquasil Ultra XLV Cartridge set 2 x 50ml (Combo)

• 1 x 450 ml Catalyst
• 1 x 450 ml Base
• 2 Spoons
• 2 x 50ml Cartridge

• Tray Preparation: 
  Use Silfix Adhesive on all types of impression trays. Brush a thin layer of Silfix onto the tray surface and allow it to dry for 3 minutes.
• Preparation of Impression Area: Clean the impression area using an air/water spray and remove any excess water.
• Mixing and Filling the Tray:
  a) Take equal amounts of the catalyst and base using the color-coded measuring spoons provided.
  b) Knead the catalyst and base together with your fingertips until the color of the mix is uniform.
  c) Immediately fill the prepared tray with the mixed material.
  Note: Do not interchange measuring spoons and tub lids.

Impression Taking: 
A) Double Mix Technique (Aquasil® Soft Putty or Hard Putty with Aquasil® Ultra LV or XLV):

• Inject the light body material using a cartridge system onto and around the tooth preparations. Squeeze the dispenser trigger with moderate and even pressure to begin mixing the material. The material will stop flowing after the trigger is released. Syringe the material completely around the preparations at the gingival margins.
• Seat the tray within 1 1/2 minutes after the start of the mix for regular set materials and 1 minute and 15 seconds for fast set materials.
• Retain the impression in position for at least 3 minutes for regular set materials and 2 minutes for fast set materials. Ensure that the impression is firm, resilient, and non-tacky before removal.

B) Putty/Wash Technique (Aquasil® Soft Putty or Hard Putty with Aquasil® Ultra LV or XLV):

• For the primary impression, seat the tray within 1 1/2 minutes after mixing Aquasil® Soft Putty or 1 minute and 15 seconds after mixing Aquasil® Hard Putty. Retain the impression in position for a minimum of 3 minutes for Aquasil® Soft Putty and 2 minutes for Aquasil® Hard Putty.
• Remove, clean, and prepare the primary impression for the secondary impression.
• Inject the light body material onto and around the tooth preparations using a cartridge system. Syringe the material completely around the preparations at the gingival margins.
• Seat the tray within 2 minutes and 15 seconds for regular set materials and 1 minute and 15 seconds for fast set materials.
• Retain the impression in position for at least 2 minutes and 45 seconds for regular set materials and 1 minute and 45 seconds for fast set materials. Ensure that the impression is firm, resilient, and non-tacky before removal.
• Cleaning, Disinfection, and Storage: 
  a) Rinse the impression under cold water and blow dry.
  b) The impression can be disinfected using a standard disinfecting solution or spray.
  c) Do not store the impression in direct sunlight.
• Casting and Electroplating: |
  a) To avoid surface porosity of models, delay pouring with plaster for 15 minutes.
  b) The impression may be poured up to fourteen days later.
  c) The material is compatible with a range of die materials, including epoxy materials, and may be silver or copper plated. Wait 60 minutes before starting plating or pouring with epoxy.
• Tray Cleaning Instruction: 
  a) Use standard methods to clean the tray after removing the impression material.
  b) Fix Solvent may be used to help remove any remaining layer of Silfix.

Question: What are the key features of Aquasil® Impression Materials?
Answer: Aquasil® Impression Materials are very high viscosity precision impression materials.
They are based on quadrafunctional hydrophilic siloxanes.
Aquasil® Impression Materials offer excellent hydrophilic properties, dimensional accuracy, high tear strength, and resistance to permanent deformation.
They comply with the requirements of ISO 4823 for dental elastomeric impression materials.

Question: What are the indications for using Aquasil® Soft Putty and Aquasil® Hard Putty?Answer: Aquasil® Soft Putty is a regular setting very high viscosity impression material suitable for easy removal from undercuts. It is ideal for the double mix technique and can also be used as a primary impression material for the putty/wash technique.
Aquasil® Hard Putty is a fast setting very high viscosity impression material with ideal mechanical properties. It is recommended as a tray material for the putty/wash technique and can also be used for quadrant impressions in the double mix technique.

Question: What are the contraindications for using Aquasil® Hard Putty?
Answer: Aquasil® Hard Putty should not be used in combination with full arch impression trays for the double mix technique. The low flexibility of the set material may interfere with tray removal.

Question: What are the recommended impression taking techniques for Aquasil® Impression Materials?
Answer: A) Double Mix Technique:
Use Aquasil® Soft Putty or Hard Putty with Aquasil® Ultra LV or XLV.
Inject light body with a cartridge system onto and around tooth preparations.
Seat the tray within the specified time after starting the mix.
Retain the impression in position for the recommended time before removal.

B) Putty/Wash Technique:
Use Aquasil® Soft Putty or Hard Putty with Aquasil® Ultra LV or XLV.
Seat the tray within the specified time after starting the mix for the putty.
Remove, clean, and prepare the primary impression for the secondary impression.
Inject light body onto and around tooth preparations and syringe additional light body on remaining surfaces.
Seat the tray within the specified time after starting the injection.
Retain the impression in position for the recommended time before removal.