Coltene Temposil 2 White Intro Kit

• Secure adhesion of provisional restorations to natural tooth structure, core build up material and metal alloys as well as zirconia.
• Simple application as well as easy removal.
• Fast setting time.
• Two shades for esthetic applications.
• Increases mechanical retention onto Zirconia & Metal crowns and on dentin too.

Working Time: ≤0:50 min
Setting Time: ≥2:00 min

Composition :

• Zinc oxide
• Polydimethylsiloxane

• 2 x Smartmix syringe (11gm)
• 15 x Mixing tips

1. Gently dry the prepared tooth surface by using oil-free compressed air. Do not overdry. The best results will be achieved, when the prepared tooth surface looks moist (shiny)
2. Cleanse and dry the inside of the restoration
3. Remove the syringe plug on the syringe and discard
4. Extrude a small amount of material directly out of the syringe onto a paper towel/tissue until it is evident that base and catalyst are being ejected. This ensures proper mixing
5. Immediately wipe the syringe orifice to remove excess material
6. Attach the Mixing Tip to the syringe by aligning the prongs inside the Mixing Tip with the syringe orifice. Seat onto the syringe and twist clockwise (90°) to lock in place
7. Apply TempoSIL 2 directly from the syringe into the provisional. Seat the provisional, applying slight pressure. Secure undisturbed for 30 - 60 s
8. After setting, remove the excess material (e.g. scaler)
9. After syringe use, disinfect used Mixing Tip and store the syringe with the used Mixing Tip attached.

CLINICAL: FOR PROVISIONAL RESTORATIONS:

STEP 1:
Apply TempoSIL 2 directly into the restoration using the Oral Tip.
STEP 2:
Seat the restoration using gentle pressure.
STEP 3:
Hold the restoration in place between 30-60 s
STEP 4:
After setting, remove excess TempoSIL 2 cement.
STEP 5:
Cemented provisional restoration.

CLINICAL CASE: IMPLANT ABUTMENTS & BRIDGE:
STEP 1: Positioned implant abutments
STEP 2: Apply TempoSIL 2 with the Oral Tip directly into the restoration
STEP 3: Seat the zirconia restoration by applying gentle pressure.
STEP 5: After setting, remove excess TempoSIL 2 material.
STEP 6: Cemented zirconia restoration.

• Warranty is not applicable for this product.

Question: Are there any specific storage requirements for TempoSIL 2?
Answer: Yes, TempoSIL 2 should be stored at temperatures between 15°C - 23°C (59°F - 73°F) and should be protected from direct sunlight or other heat sources.

Question: How long can TempoSIL 2 be used once applied?
Answer: TempoSIL 2 is designed for short-term use and should not exceed 30 days in the patient's mouth.

Question: What are the primary applications of the TempoSIL 2 White Intro Kit?
Answer: This kit is primarily designed for temporary cementation in dental procedures, such as provisional restorations, provisional restorations on implant abutments, and temporary cementation of final crowns and bridges, both on traditional abutments and implant abutments.

Question: What is included in the Coltene TempoSIL 2 White Intro Kit?
Answer: The Coltene TempoSIL 2 White Intro Kit includes temporary, radiopaque A-Silicone cement in white shade, suitable for short-term dental applications. It typically contains syringes of the TempoSIL 2 material, Mixing Tips, and instructions for use.