Coltene Speedex Putty Set (Condensation Silicon)

• 7 days dimension stability
• Controllable working times
• Surface active
• Moisture control
• Optimized precision
• Superior detail
• Excellent flow behaviours
• Haemostatic or anaesthetic substances do not influence the setting process.
• The handling with latex-gloves is also uncritical.

Composition :
Speedex putty - Polysiloxane & Peppermint oil 
Speedex light body - Polysiloxane
Speedex Universal Activator - Polysiloxane-based activator

Colour :
Speedex putty - light grey
Speedex light body - dark blue
Speedex Universal Activator - green

Speedex Light Body :

• Mixing time: 00:30 min
• Working time: ≤1:30 min
• Oral setting time: 3:00 min
• Mixing ratio Light body /Activator: 5 ml/1 ml or 5 g/0.88 g

Speedex Putty :

• Mixing time: 00:30 min
• Processing time ≤1:15 min
• Oral setting time: 3:00 min
• Mixing ratio Putty /Activator: 24 ml/1 ml or 5.50 g/0.15 g

Shelf life and storage:

• Storage temperature: 15-23°C / 59-73°F
• Relative humidity: 50% ± 10%
• Shelf life after first opening: 3 months

• 1 x Putty (910 ml)
• 1 x Light body (140 ml)
• 1 x Activator (60 ml)

Speedex Putty : 

• Spread out the Speedex putty material in the palm of hand. 
• Apply one strand length of Speedex Universal Activator per circle diameter. 
• Fold material and knead with fingers until an absolutely homogeneous colour is attained, but for at least 30-45 seconds mixing time.
• Insert the impression tray, loaded with impression material, into the oral cavity and press for 2-3 seconds. Then hold in situ until the material has set completely.

Speedex Light Body :

Dosage :

• Dispense Speedex Universal Activator and Speedex light body on a mixing block in two equal strands. Make sure that the tubes are closed immediately after use.
• Intensive mixing, high temperatures and humidity accelerate the curing of the impression materials. Low temperatures slow down the curing process. By over and underdosing the Speedex Universal Activator the processing time can be accelerated or slowed down.

Mixing :

• Take up one component (Universal Activator or light body) with spatula and spread evenly on the other component.
• Then pick up both components with the spatula and spread out on the mixing block.
• Repeat this procedure until the mixture is homogeneous. Please observe the specified processing times.

Impression :

• Depending on the impression method, apply the impression material in the patient’s mouth or to the impression tray.
• Insert the impression tray into the oral cavity and press for 2-3 seconds and keep in situ until set completely.

Pouring of models :

• The ideal time lies between 30 min and 72 h after taking the impression.
• The surface tension will be reduced and pouring will be facilitated if the impression is briefly washed out with a detergent and rinsed thoroughly in lukewarm clear water afterwards. All industry-standard dental stone model materials can be used.

• Country of Origin: Switzerland
• Manufacturer: Coltène Whaledent

• Warranty is not applicable for the same.

Question: Does Speedex Light Body have any adverse effects when in contact with saliva and blood?
Answer: No, Speedex Light Body displaces saliva and blood without negative side effects.

Question: Is Speedex Light Body suitable for mucosal movements required in denture techniques?
Answer: Yes, Speedex Light Body with its variable setting time can accurately capture important mucosal movements required for full and partial denture techniques.

Question: What is the recommended shelf life and storage conditions for Coltene Speedex Putty Set?
Answer: The recommended storage temperature is 15-23°C (59-73°F), with a relative humidity of 50% ± 10%. After first opening, the shelf life is 3 months.

Question: What are the color codes for different components of the Speedex system?
Answer: Speedex putty is light grey, Speedex light body is dark blue, and Speedex Universal Activator is green.

Question: Is Speedex Putty suitable for specific techniques?
Answer: Yes, Speedex Putty is preferred for the 2-step technique where pressure is required.

Question: How long can impressions made with Coltene Speedex Putty Set be cast without issues?
Answer: Impressions made with Coltene Speedex Putty Set can be cast for up to 7 days without any problems due to its low shrinkage and dimensional stability.

Question: What is Coltene Speedex Putty Set, and what is it used for?
Answer: Coltene Speedex Putty Set is a dental product used for making impressions in dentistry. It is primarily used by dental professionals to create accurate molds of a patient's teeth and oral structures.