Bio-art Microjato Microblaster

• Versatile Applications: Suitable for cement removal, internal cleaning, occlusal sandblasting, adjustment of interproximal contacts, and more.
• Material Compatibility: Effective for metal, resin, ceramic crowns, and casting parts.
• Intra-Oral Ceramic Repair: Facilitates the practice of "Intra-Oral Ceramic Repair" by cleaning and degreasing metal and ceramic.
• Oxide Removal: Efficiently removes oxide for improved restoration quality.
• Quick Coupling: Comes with a Quick Coupling for easy connection and detachment.
• Direct Equipment Connection: This can be directly connected to Borden-type equipment for convenience.
• Microretentions: Enables precise adjustments and placements of crowns with microretentions.
• Internal Evidentness: Provides internal evidentness for adjusting and placing crowns accurately.

Technical Specifications:

• Package Dimension (W x T x H): 190 x 133 x 50mm
• Work Pressure: 60 a 80 lbf/pol (4-5,5 kgf/cm)

• 1 x Microblaster with fixed nozzle and ejecting needle at 138º
• 1 x Quick Coupling
• 1 x Handpiece Connector
• 1 x A tank with 40g aluminum oxide 50 microns
• 1 x Instruction Manual

• Setup: Connect the Microblaster to Borden-type equipment or use the supplied Quick Coupling for a convenient connection.
• Loading Media: Load the appropriate blasting media into the Microblaster. Ensure it is suitable for the intended application (e.g., occlusal sandblasting, cleaning).
• Adjustment: Adjust the air pressure based on the specific requirements of the procedure. Refer to the recommended pressure settings for different applications.
• Targeted Blasting: Direct the nozzle of the Microblaster to the targeted area on the dental restoration, such as crowns, inlay-onlay, or casting parts.
• Cleaning and Adjustment: Use the Microblaster for cleaning, degreasing, oxide removal, and fine adjustments. It is particularly useful for intra-oral ceramic repair.
• Interproximal Contacts: Utilize the Microblaster for adjusting interproximal contacts with precision.
• Completion: Once the desired cleaning, adjustment, or blasting is achieved, disconnect the Microblaster from the equipment.
• Cleaning and Maintenance: After each use, clean the Microblaster thoroughly to ensure optimal performance.

• Country of Origin: Made in Brazil
• Manufacturer: Bio-Art Eqpt Odontologicos.

•  Manufacturer/Importer warranty of 12 months as applicable for this product. Service and Warranty are handled by the manufacturer/importer directly for this product
  Oralkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer.
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only.
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced.
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
• Please click here to know about our return policy & how warranty is covered at Oralkart.

Question: Can it be used in dental labs?
Answer: Yes, the Bio-art Microjato Microblaster can be used in both dental offices and dental laboratories. It is highly practical, ergonomic, and accurate for small tasks, especially where precision is required in areas with minimal contact with preservation zones during blasting.

Question: How can I just order the aluminium oxide powder?
Answer: If you are looking to purchase the aluminum oxide powder for the Bio-art Microjato Microblaster, you can search for Sparedent Korox 50 Powder for Sandblaster/Polisher on oralkart. This product is specifically designed for use with sandblasters and polishers and can be used as a replacement for the aluminum oxide powder used in the Bio-art Microjato Microblaster.

Question: Can we connect this to airotor handpiece point which is regularly used, or do we need any adapter while using ?
Answer: Yes, the Bio-Art Microjato Microblaster can be connected to a standard Airotor handpiece tubing without the need for an adapter. This compatibility allows for seamless integration of the Microblaster with your existing dental equipment setup.

Question: Can this be used to remove tobacco and other stains on teeth after scaling ?
Answer: The Bio-art Microjato Microblaster is not recommended for removing tobacco and other stains on teeth after scaling. For effective stain removal post-scaling, it is advised to use an air polisher specifically designed for this purpose. Air polishers offer a more suitable and efficient solution to achieve optimal results in stain removal while maintaining the integrity of the tooth surface.

Question: Can this be used intraorally?
Answer: Yes, the Bio-art Microjato Microblaster can be used intraorally. However, caution should be exercised to avoid spraying into the gingiva to prevent the risk of gingival laceration or air embolism.

Question: What is the main purpose of the Bio-Art Microjato Microblaster?
Answer: The Microblaster is primarily used for surface blasting in dental procedures, including micro-retentions, cement removal, and internal cleaning.

Question: How does the sintered carbide ejecting needle contribute to the Microblaster's performance?
Answer: The needle ensures higher durability and accuracy during blasting, making it suitable for various dental applications.

Question: How far should the Microblaster needle be kept from the surface during blasting?
Answer: It is recommended to maintain a distance of 5 to 10mm between the face of the Microblaster needle tip and the surface being worked on during blasting.

Question: What abrasive material is recommended for use?
Answer: Fill the tank with aluminum oxide abrasive material, ensuring it does not exceed 3/4 of its capacity.