Apple A1 Airotor Handpiece (3 Months Warranty)-Super Torque-Push Button (TU)

• Stylish
  
• Good Quality Cartridge
  
• Optimal access
  
• Premium speed
  
• Maximal precision
  
• Anti-retraction function: Four holes on the head to maintain airflow, also when the dental unit is stopped
  
• The dirt can come out under the air pressure of inertance through these 3 holes.

• Head Size: Super Torque Push Button
• Fitting: Two Holes / Normal Fitting
• Water Spray: Single
• Bur Size : 1.59 mm - 1.60 mm
• Air Pressure:0.18-0.21MPa
• Speed: 350000-400000rpm
• Autoclavable: up to 135 C

• 1x Handpiece
• 1x User Manual

• They’re one-piece units with a slight curve in appearance and are much louder in use than slow-speed handpieces. The head angulation can vary between handpieces.
• The only additional item used with high speeds is a bur: a rotary instrument with a friction grip (that works like a drill bit in a drill). We’ll come back to burs later.
  
• Typically rotating at between 180,000 and 450,000 rpm, they incorporate water spray as a coolant due to the large amount of heat that they would otherwise produce.
• Cooling the tooth helps prevent overheating of the pulp. Water delivery can be ‘a multi-port (three or four spray points) or a single port. A multi-port jet allows for a higher cutting rate.
  
• To lubricate the high-speed handpiece, inject lubricant into the smallest of the two large holes until it’s lightly pouring out. Before reusing it, attach it to your dental unit and run it for approximately 10 seconds.

• Country of Origin: Made in PRC
• Manufacturer: Apple Dental

• Manufacturer/Importer warranty of 3 months on Cartridge as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Oralkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced.
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or does not tamper as the case may be.

Question: Is it necessary to purchase a separate cartridge for the Apple A1 Airotor Handpiece (Super Torque-Push Button TU)?
Answer: No, a separate cartridge is not required for the Apple A1 Airotor Handpiece (Super Torque-Push Button TU) as it comes with a pre-installed cartridge.

Question: How to claim warranty?
Answer: To claim the warranty for the Apple A1 Airotor Handpiece (3 Months Warranty)-Super Torque-Push Button (TU), please contact support@oralkart.com. The support team will assist you with the warranty claim process and provide the necessary guidance.

Question: Which cartridge is compatible with this airotor?
Answer: To buy compatible cartridge forApple A1 Airotor Handpiece (3 Months Warranty)-Super Torque-Push Button (TU), you need to search for Cartridge For Apple Dental Push Button Airotor-Super Torque on Oralkart.

Question: Is the bur key provided in the packaging ?Answer: The Apple A1 Airotor Handpiece Super Torque-Push Button (TU) is a push button type of airotor, so there's no need for a bur key for bur installation and removal.

Question: What is the purpose of the Apple Dental High-Speed Air Rotor Super Torque Push Button Handpiece?
Answer: The Apple Dental High-Speed Air Rotor Super Torque Push Button Handpiece is used in dental procedures for tasks such as the removal of dental caries (decay) and polishing enamel or restorative materials. It provides rotational force to the cutting instrument, typically a dental burr, to facilitate these procedures.

Question: What is the head size of the Super Torque Push Button Handpiece?
Answer: The Apple Dental High-Speed Air Rotor Super Torque Push Button Handpiece comes with a Super Torque Push Button head size.

Question: What type of fitting does the handpiece have?
Answer: The handpiece is available with a two-hole or normal fitting, allowing it to be compatible with different dental units or connections.

Question: What is the recommended air pressure for the Apple Dental High-Speed Air Rotor Super Torque Push Button Handpiece?
Answer: The recommended air pressure for this handpiece is typically between 0.18-0.21 MPa.

Question: Can the handpiece be autoclaved?
Answer: Yes, the Apple Dental High-Speed Air Rotor Super Torque Push Button Handpiece is designed to be autoclavable. It can withstand autoclaving temperatures of up to 135°C for sterilization.