Ammdent Orthodontic Adhesive Kit

• Advanced composition for strong bonds
• Detailed tooth preparation instructions
• Convenient disposable primer brushes
• Precise bracket positioning
• Efficient 90-second curing with lamp
• Gentle bracket removal with ligature cutter
• Comprehensive kit for complete bonding process

• Composition: Crystalline and fumed silicon dioxide, Bisg-ma stabilizer, Photo initiators
• Application: Cementation of orthodontic brackets
• Tooth Preparation: Prophy with plain pumice, Etching solution application, Thorough rinsing
• Bracket Placement: Thin primer coat, 45 seconds conditioning for plastic brackets, 90-second curing with lamp
• Bracket Removal: Ligature cutter usage, Slow peeling to avoid shearing, Polishing with pumice after removal
• Time Efficiency: 5-minute check for loose bonds after bracket placement

• 1 x 5gm Adhesive Tube
• 1 x 3ml Etching bottle
• 1 x 3gm Bonding Agent
• 10 x Plastic Applicator Brushes
• 1 x Handle for applicator brushes
• 1 x Mixing Pad

Tooth Preparation:

• Clean the enamel surfaces with plain pumice, avoiding oil or fluoride-containing pastes.
• Rinse thoroughly and dry teeth with oil and moisture-free compressed air. Ensure the patient does not rinse.
• Isolate cleaned teeth for optimal etching conditions.
• Dispense 1 to 2 drops of etching solution onto a dispensing pad. Apply the solution with a dabbing motion to the prophy teeth to be bonded for 60 seconds.
• Rinse thoroughly with water, ensuring no contamination. Re-isolate and dry the tooth thoroughly.

Application of Adhesive Bracket Placement:

• Apply a thin coat of primer to each etched, dry tooth and the underside of each bracket base using a disposable primer brush.
• Allow approximately 45 seconds for plastic brackets to condition.
• Apply a small quantity of adhesive paste to the underside of the bracket base and place it on the tooth.
• Adjust the bracket position as necessary. Activate the composite adhesive with the curing lamp for at least 90 seconds.
• Do not move the bracket once the adhesive hardens. Remove excess adhesive if needed.

Bracket & Adhesive Removal:

• Use a ligature cutter to grab the adhesive at the enamel adhesive interface and slowly peel the bracket/base off the tooth.
• Avoid shearing or twisting forces during removal.
• Clean surfaces with a sealing instrument and polish with pumice.

• Manufacturer: Amrit Chemicals & Minerals Agency
• Country of Origin: India

• Warranty is not applicable for this product.

Question: What is the shelf life of the Visible Light Cure Composite?
Answer: The shelf life of the Visible Light Cure Composite is typically indicated on the packaging and can vary but generally ranges from 12 to 24 months when stored properly.

Question: Can the composite be used with all types of orthodontic brackets?
Answer: Yes, the composite is designed to be compatible with various types of orthodontic brackets, including metal and plastic brackets.

Question: Is it necessary to etch the enamel before applying the adhesive?
Answer: Yes, proper enamel preparation, including etching, is crucial for ensuring a strong bond between the bracket and the tooth surface.

Question: How long does the curing process take with the curing lamp?
Answer: The curing process typically takes at least 90 seconds with the curing lamp to ensure thorough activation of the adhesive.

Question: Is the ligature cutter method safe for bracket removal?
Answer: Yes, the ligature cutter method is a safe and effective way to remove bonded brackets without causing damage to the enamel or surrounding structures when performed correctly.

Question: Can the kit be used for both upper and lower teeth?
Answer: Yes, the orthodontic adhesive kit can be used for bonding brackets on both upper and lower teeth, following the provided instructions for each tooth surface.

Question: Are disposable primer brushes provided in the kit?
Answer: Yes, disposable primer brushes are typically included in the kit for convenient and hygienic application of the primer on both teeth and bracket bases.