3m Espe Filtek Bulk Fill Flowable Restorative - Refills

• Optimized Filler and Monomer Blend: Designed to maximize strength, wear resistance, and radiopacity while minimizing shrinkage.
• Low Viscosity: Ensures easy adaptation in deep restorations with little or no instrumentation.
• Low Shrinkage and Polymerization Stress: Intelligent selection of monomers and fillers produces a restorative with minimal shrinkage and stress during polymerization.
• Bulk Fill Capability: Can be used to perform bulk fill restorations with a depth of cure up to 4mm.
• Warming Tolerance: Capsules can be safely warmed up to 70°C for up to one hour, allowing for injection molding.
• Versatile Applications: Suitable for use as a bulk fill base or a low-stress liner in various restorative procedures.
• Radiopaque: Easily distinguishable on radiographs, aiding in diagnosis and follow-up.
• Excellent Handling Properties: Flowable consistency allows for precise placement and easy adaptation to cavity walls.
• Strong Bond: Provides durable adhesion when used with compatible bonding agents.
• Aesthetic Results: Offers good color stability and matches the natural tooth shade for pleasing aesthetic outcomes.

• Composite Type: Bulk Fill Flowable
• Cure Type: Light Cure
• Delivery System: Capsule, Syringe
• Depth of Cure: 4mm
• Material Structure: Microhybrid Composite
• Shades: A2, A3

3M Espe Filtek Bulk Fill Flowable Restorative Bottle

• 1 x 4g Bottle (20 Capsules)

3M Espe Filtek Bulk Fill Flowable Restorative Syringe

• 1 x 2g Syringe

How to Use 3M™ Filtek™ Bulk Fill Flowable Restorative Capsules

Preparation:

• Ensure the tooth is clean and dry. Use a rubber dam if necessary to isolate the area.
• Apply retraction paste and clean the tooth surface thoroughly.

Etching:

• Apply a phosphoric acid etchant to the prepared cavity for 15-30 seconds.
• Rinse thoroughly with water and dry the tooth without desiccating it.

Bonding:

• Apply a bonding agent according to the instructions.
• Light-cure the bonding agent for the recommended time.

Warming (Optional):

• Warm the capsules up to 70°C for up to one hour if desired.

Dispensing:

• Attach the capsule to a dispensing gun.

Application:

• Dispense the flowable restorative material directly into the cavity.
• Use a dental instrument to ensure even distribution and fill the entire cavity space.

Layering:

• For deep cavities, apply the material in increments up to 4mm in depth.
• Ensure each layer is adequately cured before applying the next layer.

Curing:

• Use a curing light to polymerize the material. Follow the recommended curing time.
• Ensure the light covers the entire restoration area for uniform curing.

Finishing:

• Once the final layer is cured, proceed with finishing and polishing the restoration.

Final Check:

• Verify the occlusion and make any necessary adjustments.
• Ensure the restoration is smooth and comfortable for the patient.

How to Use 3M™ Filtek™ Bulk Fill Flowable Restorative Syringe

Preparation:

• Ensure the tooth is clean and dry. Use a rubber dam if necessary to isolate the area.
• Apply retraction paste and clean the tooth surface thoroughly.

Etching:

• Apply a phosphoric acid etchant to the prepared cavity for 15-30 seconds.
• Rinse thoroughly with water and dry the tooth without desiccating it.

Bonding:

• Apply a bonding agent according to the instructions.
• Light-cure the bonding agent for the recommended time.

Warming (Optional):

• Warm the syringe up to 70°C for up to one hour if desired.

Dispensing:

• Remove the cap and attach a suitable dispensing tip to the syringe.

Application:

• Slowly dispense the flowable restorative material directly into the cavity.
• Use a dental instrument to ensure even distribution and fill the entire cavity space.

Layering:

• For deep cavities, apply the material in increments up to 4mm in depth.
• Ensure each layer is adequately cured before applying the next layer.

Curing:

• Use a curing light to polymerize the material. Follow the recommended curing time.
• Ensure the light covers the entire restoration area for uniform curing.

Finishing:

• Once the final layer is cured, proceed with finishing and polishing the restoration.

Final Check:

• Verify the occlusion and make any necessary adjustments.
• Ensure the restoration is smooth and comfortable for the patient.

• Warranty is not applicable for this product.

Question : What is 3m Espe Filtek Bulk Fill Flowable Restorative?
Answer: 3M™ Filtek™ Bulk Fill Flowable Restorative is a dental composite material used for filling cavities. It allows for bulk filling of cavities up to 4mm in depth in a single increment, simplifying and speeding up the restorative process.

Question : What is the depth of cure for 3M™ Filtek™ Bulk Fill Flowable Restorative?
Answer: The depth of cure is up to 4mm.

Question : How is the material's viscosity advantageous?
Answer: The low viscosity allows for easy adaptation in deep restorations with minimal or no instrumentation.

Question : How should the capsules be prepared before use?
Answer: Capsules can be safely warmed up to 70°C for up to one hour and then injection molded.

Question : Does 3M™ Filtek™ Bulk Fill Flowable Restorative have radiopacity?
Answer: Yes, it is designed to be radiopaque.