3M ESPE Elipar DeepCure L LED Curing Light

• High-performance LED light source
• Customizable exposure times (5, 10, 15, 20 seconds, continuous mode, tack-cure mode)
• Uniform beam profile for precise polymerization
• Wireless handpiece with replaceable lithium-ion battery
• Safety features include sleep mode and protection against overexposure
• Compatible with a wide range of light-curing dental materials
• Compact and ergonomic design for ease of use in dental procedures

• Light Source: High-performance LED
• Wavelength Range: 430 - 480 nm
• Peak Wavelength: 444 - 452 nm
• Light Intensity: 1470 mW/cm² (between 400 and 515 nm)
• Light Emission Area: 60 - 65 mm² (optically active)
• Power Supply: Lithium-ion battery
• Exposure Time Settings: 5, 10, 15, 20 seconds; Continuous mode (120 seconds); Tack-cure mode (1 second)
• Battery Capacity: 2300 mAh

• 1 x Elipar DeepCure L LED Curing Light

Preparation:

• Ensure the device is fully charged before use.
• Verify that the light guide is clean and securely attached to the handpiece.

Power On:

• Press the power button on the handpiece to turn on the device.

Select Exposure Time:

• Choose the appropriate exposure time setting for the dental material being cured: 5, 10, 15, or 20 seconds, continuous mode (120 seconds), or tack-cure mode (1 second).

Positioning:

• Direct the light beam towards the area requiring treatment, maintaining a safe distance from oral tissues.

Curing Process:

• Hold the handpiece steady and activate the curing light.
• Ensure proper illumination of the treatment area throughout the selected exposure time.

Post-Curing:

• After curing, deactivate the light and remove the handpiece from the treatment area.

Repeat or Adjust:

• Repeat the process for additional curing as necessary or adjust the exposure time based on clinical judgment.

Power Off:

• Turn off the device by pressing the power button on the handpiece.

Charging:

• Recharge the handpiece by connecting it to the charger when the battery power level indicator shows a steady red light.

Maintenance:

• Clean the light guide and handpiece regularly as per the manufacturer's instructions to maintain optimal performance.

Storage:

• Store the device in a safe and clean environment, placing the handpiece on a flat surface when not in use.

Safety Precautions:

• Follow all safety instructions provided in the user manual to prevent injury or damage.
• Use appropriate protective equipment such as goggles to shield eyes from intense light.

• Country Of Origin: Germany
• Manufacturer: 3M

• Manufacturer/Importer warranty of 1 Year as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Oralkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Oralkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Oralkart may assist the customer in registering a request to get the Product replaced or serviced.
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

Question : Is it safe to use this curing light on patients with certain medical conditions?
Answer: Individuals with heart pacemaker implants or a history of photobiological reactions should avoid using the device. Patients with retinal diseases or a history of cataract surgery should take extreme care and consult their healthcare provider before use.

Question : How should I clean and maintain the device?
Answer: Clean the light guide and handpiece regularly as per the manufacturer's instructions. Avoid using cleaning agents that could enter the device and cause electrical malfunction. Store the device in a safe and clean environment when not in use.

Question : What exposure times are available with this curing light?
Answer: The device offers exposure times of 5, 10, 15, and 20 seconds, as well as continuous mode (120 seconds) and tack-cure mode (1 second) for specific applications.

Question : Can I use this curing light with other light guides from different devices?
Answer: No, it is not permissible to use light guides from other devices with the Elipar DeepCure-L. It must be used only with the provided or original 3M ESPE light guide to maintain optimal performance and safety.

Question : How do I know when the battery needs to be charged?
Answer: The handpiece features a battery power level indicator. When the indicator glows red steadily, it's time to connect the handpiece to the charger for recharging.